A consolidation analysis method for an earth-rockfill dam based on the coupling of physical state, stress deformation, and seepage was established. In this method, a permeability coefficient model considering physical state and shear stress level was introduced, and it was integrated with Biot’s consolidation theory to simulate the coupling relationship. Taking the Nuozhadu high earth-rockfill dam as an example, a parameter back-analysis method using a neural network and evolutionary algorithm was applied to back-analyze the permeability coefficient model parameters of the core material based on observation data of pore water pressure in the dam. Then, consolidation numerical analyses were performed by using the back-analyzed parameters and the constant permeability measured in situ, respectively. The spatial and temporal distribution of pore water pressure calculated by the back-analyzed parameters coincided quite well with the monitoring data during construction and operation. However, the nume...
Using a sample of events accumulated with the BES II detector, evidence for production in decays is obtained for the first time; the branching ratio is determined to be . The significance of the signal is about 4.6.
The parameters of the constitutive model, the creep model, and the wetting model of materials of the Nuozhadu high earth-rockfill dam were back-analyzed together based on field monitoring displacement data by employing an intelligent back-analysis method. In this method, an artificial neural network is used as a substitute for time-consuming finite element analysis, and an evolutionary algorithm is applied for both network training and parameter optimization. To avoid simultaneous back-analysis of many parameters, the model parameters of the three main dam materials are decoupled and back-analyzed separately in a particular order. Displacement back-analyses were performed at different stages of the construction period, with and without considering the creep and wetting deformations. Good agreement between the numerical results and the monitoring data was obtained for most observation points, which implies that the back-analysis method and decoupling method are effective for solving complex problems with multiple models and parameters. The comparison of calculation results based on different sets of back-analyzed model parameters indicates the necessity of taking the effects of creep and wetting into consideration in the numerical analyses of high earth-rockfill dams. With the resulting model parameters, the stress and deformation distributions at completion are predicted and analyzed.
An algorithm for coupling the smoothed particle hydrodynamics (SPH) method and the finite element method (FEM) is proposed for fluid–structure interaction (FSI) problems. The SPH module solves the fluid motion, and the FEM module describes the deformation of structures. In the algorithm, a structure is considered as a solid boundary in the SPH module and dealt with using the dynamic boundary condition. Only three layers of SPH boundary particles are set to represent the structure surface, and the interaction forces between the SPH boundary and fluid particles, including the water pressure and the viscous shear stress, are quantified in a same way as the inter-fluid particle forces. Further, the computed forces on the SPH boundary particles exerted by the fluid are redistributed to the structure FEM nodes based on a well-defined projection scheme. In the FEM module, the deformation and motion of the structure under the exerted fluid forces are solved, and accordingly, the position and velocity of the SPH boundary particles are updated by interpolation from the new properties at the FEM nodes. The proposed SPH-FEM coupled model is validated in three FSI benchmarks. For the deformation of an elastic plate under hydrostatic water pressure, the relative difference between the computed and the analytical maximum vertical displacement at the plate midpoint is about 1.5%. For the deformation of an elastic gate subjected to a time-varying dam-break flow, the relative root mean squared errors in the computed vertical and horizontal displacement of the gate are, respectively, 5.5% and 2.2%. It is demonstrated that the proposed model performs well in simulating the deformation of structures under both hydrostatic water pressure and dynamic impacts of dam-break flows.
1 January 2010 in Mechanics Research Communications
This paper presents a study on the numerical performance of three contact simulation methods, namely, the interface element, thin-layer element, and contact analysis methods, through the analysis of the contact behavior between the concrete face slab and the dam body of a high concrete-faced rockfill dam named Tianshengqiao-I in China. To investigate the accuracy and limitations of each method, the simulation results are compared in terms of the dam deformation, contact stress along the interface, stresses in the concrete face slab, and separation of the concrete face slab from the cushion layer. In particular, the predicted dam deformation and slab separation are compared with the in-situ observation data to classify these methods according to their agreement with the in-situ observations. It is revealed that the interface element and thin-layer element methods have their limitations in predicting contact stress, slab separation, and stresses in the concrete face slab if a large slip occurs. The contact analysis method seems to be the best choice whether the separation is finite or not.