Due to their small footprint and flexible siting, rechargeable batteries are attractive for energy storage systems. A super-valent battery based on aluminium ion intercalation and deintercalation is proposed in this work with VO2 as cathode and high-purity Al foil as anode. First-principles calculations are also employed to theoretically investigate the crystal structure change and the insertion-extraction mechanism of Al ions in the super-valent battery. Long cycle life, low cost and good capacity are achieved in this battery system. At the current density of 50[emsp14]mAg-1, the discharge capacity remains 116[emsp14]mAhg-1 after 100 cycles. Comparing to monovalent Li-ion battery, the super-valent battery has the potential to deliver more charges and gain higher specific capacity.
For exploring promising energy storage devices beyond lithium ion batteries, aluminum ion batteries (AIBs) are desirable cells with high energy-to-price ratios because of abundant natural resources, the higher energy density of aluminum and elimination of unexpected safety risks. Nevertheless, an ideal rechargeable AIB configuration with ultrahigh capacity is still fundamentally pursued. For fundamentally promoting the most promising chalcogen or chalcogenide-based AIB positive electrode materials, here rechargeable tellurium (Te) nanowire positive electrodes are demonstrated to construct novel tellurium–aluminum batteries. The cell configuration allows Te nanowires for delivering an ultrahigh discharge capacity ∼1026 mA h g−1 (with a specific current of 0.5 A g−1) along with an initial 1.4 V discharge voltage, competitive with the record-setting energy density of the documented AIBs. For essentially tackling the dramatic capacity loss in tellurium positive electrodes, the mechanism of impacting the rechargeable ability is linked to the production of soluble tellurium chloroaluminate compounds upon both chemical dissolution and electrochemical conversion processes. As a consequence, the cell configuration is proved to substantially suppress the unexpected shuttle effects induced by soluble tellurium chloroaluminate compounds via employing reduced graphene oxide to support the tellurium positive electrodes as well as utilizing functionalized carbon nanotube membranes to modify the separators. The implication of the results suggests a nice plateau for massively promoting the rechargeable ability of AIBs, advancing remarkable routes for achieving ultrahigh capacity and energy density.
6 December 2016 in Journal of Materials Chemistry A
Affordable and scalable energy storage systems are necessary to mitigate the output fluctuation of an electrical power grid integrating intermittent renewable energy sources. Conventional battery technologies are unable to meet the demanding low-cost and long-life span requirements of a grid-scale application, although some of them demonstrated impressive high energy density and capacity. More recently, the prototype of an Al-ion battery has been developed using cheap electrode materials (Al and graphite) in an organic room-temperature ionic liquid electrolyte. Here we implement a different Al-ion battery in an inorganic molten salt electrolyte, which contains only an extremely low-cost and nonflammable sodium chloroaluminate melt working at 120 °C. Due to the superior ionic conductivity of the melt electrolyte and the enhanced Al-ion interaction/deintercalation dynamics at an elevated temperature of 120 °C, the battery delivered a discharge capacity of 190 mA h g−1 at a current density of 100 mA g−1 and showed an excellent cyclic performance even at an extremely high current density of 4000 mA g−1: 60 mA h g−1 capacity after 5000 cycles and 43 mA h g−1 capacity after 9000 cycles, with a coulombic efficiency constantly higher than 99%. The low-cost and safe characteristics, as well as the outstanding long-term cycling capability at high current densities allow the scale-up of this brand-new battery for large-scale energy storage applications.