27 June 2019 in Journal of Lightwave Technology
High-performance III-V quantum-dot lasers monolithically grown on Si substrates have been demonstrated as a promising solution to realise Si-based laser sources with very low threshold current density, high output power and long lifetime, even with relatively high density of defects due to the material dissimilarities between III-Vs and Si. On the other hand, although conventional III-V quantum-well lasers grown on Si have been demonstrated after great efforts worldwide for more than 40 years, their practicality is still a great challenge because of their very high threshold current density and very short lifetime. However, the physical mechanisms behind the superior performance of silicon-based III-V quantum-dot lasers remain unclear. In this paper, we directly compare the performance of a quantum-well and a quantum-dot laser monolithically grown on on-axis Si (001) substrates, both experimentally and theoretically, under the impact of the same density of threading dislocations. A quantum-dot laser grown on a Si substrate with a high operating temperature (105 °C) has been demonstrated with a low threshold current density of 173 A/cm $^2$ and a high single facet output power >100 mW at room temperature, while there is no lasing operation for the quantum-well device at room temperature even at high injection levels. By using a rate equation travelling-wave model, the quantum-dot laser's superior performance compared with its quantum well-based counterpart on Si is theoretically explained in terms of the unique properties of quantum dots, i.e., efficient carrier capture and high thermal energy barriers preventing the carriers from migrating into defect states.
27 January 2009 in IEEE Photonics Technology Letters
We present a detailed investigation of the radio-frequency (RF) linewidth and noise performance of a 10-GHz packaged monolithic two-section quantum-dot mode-locked laser diode. Record low 500-Hz RF linewidths are reported under passive mode-locking operation, and the single sideband phase noise spectra and associated timing jitter performance under both passive and hybrid mode-locking is investigated.
27 November 2004 in New Journal of Physics
6 April 2022 in IEEE Transactions on Communications
MSMohammad Dehghani Soltani
Mohammad Dehghani Soltani
+3
In this paper, the design of a multiple-input multiple-output (MIMO) optical wireless communication (OWC) link based on vertical cavity surface emitting laser (VCSEL) arrays is systematically carried out with the aim to support data rates in excess of 1 Tb/s for the backhaul of sixth generation (6G) indoor wireless networks. The proposed design combines direct current optical orthogonal frequency division multiplexing (DCO-OFDM) and a spatial multiplexing MIMO architecture. For such an ultra-high-speed line-of-sight (LOS) OWC link with low divergence laser beams, maintaining alignment is of high importance. In this paper, two types of misalignment error between the transmitter and receiver are distinguished, namely, radial displacement error and orientation angle error, and they are thoroughly modeled in a unified analytical framework assuming Gaussian laser beams, resulting in a generalized misalignment model (GMM). The derived GMM is then extended to MIMO arrays and the performance of the MIMO-OFDM OWC system is analyzed in terms of the aggregate data rate. Novel insights are provided into the system performance based on computer simulations by studying various influential factors such as beam waist, array configuration and different misalignment errors, which can be used as guidelines for designing short range Tb/s MIMO OWC systems.
28 January 2009 in Journal of Optical Networking
A scalable photonic interconnection network architecture is proposed whereby a Clos network is populated with broadcast-and-select stages. This enables the efficient exploitation of an emerging class of photonic integrated switch fabric. A low distortion space switch technology based on recently demonstrated quantum-dot semiconductor optical amplifier technology, which can be operated uncooled, is used as the base switch element. The viability of these switches in cascaded networks is reviewed, and predictions are made through detailed physical layer simulation to explore the potential for larger-scale network connectivity. Optical signal degradation is estimated as a function of data capacity and network size. Power efficiency and physical layer complexity are addressed for high end-to-end bandwidth, nanosecond-reconfigurable switch fabrics, to highlight the potential for scaling to several tens of connections. The proposed architecture is envisaged to facilitate high-capacity, low-latency switching suited to computing systems, backplanes, and data networks. Broadband operation through wavelength division multiplexing is studied to identify practical interconnection networks scalable to 100 Gbits/s per path and a power consumption of the order of 20 mW/(Gbits/s) for a 64×64 size interconnection network.
29 November 2004 in Applied Physics Letters
We report optical signal amplification in a solid-state dye-doped polymer with a rib waveguide structure. A pulsed signal and a collinear pump are coupled into a poly(methyl methacrylate) waveguide doped with 1% by weight Rhodamine 640 dye. Depending on the signal intensity, a maximum optical gain in the range is obtained from a -long device, accompanied by a signal-to-noise ratio in the range.