Integrated circuits (ICs) undergo dimensional reduction and the functional unit of density dramatically increases, the reliability issue becomes more critical, especially with respect to three-dimensional (3D) silicon integration technology. Through-Silicon Vias (TSVs) technology is one of the most prominent feature used for interconnecting between chips. Since TSVs contain interfaces of heterogeneous materials with high CTE mismatch, large thermal stresses would appear at this place under temperature loading, often leading to mechanical failure. The mathematical model of thermal stress and the fracture failure modelling of Cu/SiO 2 interface in TSV using finite element method (FEM) with cohesive zone model was employed. The influence of the diameter and height of Cu, the thickness of SiO 2 and the pitch of TSVs array on stress of TSV was calculated by orthogonal experimental designs. And range analysis was also adopted to investigate the Cu/ SiO 2 interfacial reliability. The simulations reveal that the scalar stiffness degradation variable increased along with the diameter of Cu growing, but as the thickness of SiO 2 grew from 0.5μm to 1.5μm, there was a gradual decrease of the scalar stiffness degradation variable. The order of different structural parameters responsible for the TSV failure is: the diameter of Cu, the thickness of SiO 2 , the height of the via hole, and the pitch of TSV. A TSV sample was selected to calculate the failure of the annealing process using cohesive zone model. The results showd that the stress of Cu/SiO 2 interface was dominated by shear stress, and the failure mode of TSV was sliding mode failure.
Through Silicon Via(TSVs) technology is one of the most prominent feature in future microelectronic devices packaging. Since TSVs contain the interfaces of heterogeneous materials that have high CTE mismatch, and would hence produce large thermal stresses under temperature loading, often leading to mechanical failure. A failure stress mathematical model is established and the algorithm of mathematical model is prepared by using subroutine and fracture failure modeling of Cu/SiO2 interface in TSV using finite element method (FEM) with cohesive zone model as well as stiffness degradation evaluation criterion was employed. Numerical simulation results show that large thermal stresses induced by the unique feature of TSV structure and the high mismatch of CTE between silicon substrate, dielectric layer and copper core, would lead to Cu/SiO2 interface delamination and the failure mode of the interface is shear stress predominantly. The phase angle at the tip of interfacial crack is almost 80 degrees when the interface was about to crack and then it will decrease as the crack grows gradually. However, the value of phase angle is always more than 45 degrees. Additionally, the fracture analysis to the damage process of interfacial crack under mixed-mode loading has been derived based on power law of energy criterion. It is noted that the temperature cracking of the interface is reduced and the crack propagation of Cu/SiO2 will difficult as the fracture energy of cohesive elements increases.