24 August 2018 in IEEE Transactions on Industrial Electronics
In this paper, a decentralized energy management strategy (EMS), which is based on a modified droop control, is proposed for a fuel cell (FC)/supercapacitor (SC)-based auxiliary power unit (APU) of a More Electric Aircraft (MEA). The proposed EMS is able to split the load power automatically into low- and high-frequency components and allocate them to the FC and SC units respectively. Since the proposed EMS is fully decentralized, it features high flexibility and scalability. Furthermore, the proposed strategy is not only suitable for extending the service life of the system because the protection and recovery of the state-of-charge (SoC) of the SC have been considered in doing the energy management, but also can make the system accommodate the regenerative power in a lossless way. The operational principle of the proposed strategy, system design details and performance analysis are elaborated, followed by which experiments based on a 3kW FC/SC-APU are conducted to verify its validity.
3 May 2018 in IEEE Transactions on Industrial Electronics
In this paper, an enhanced mixed droop control strategy is proposed for fuel cell/supercapacitor-based auxiliary power unit (FC/SC-APU), which is usually used in large electric vehicles, to achieve the dynamic load power allocation in a decentralized way. By applying an adjustable virtual impedance droop scheme to the SC converter and a virtual resistor droop scheme to the FC converter, the SC is able to buffer the fast-changing or pulsating load power flow, leaving the FC only providing the average load power. Since this method is fully decentralized, it features high flexibility and scalability. Furthermore, the proposed strategy is very suitable for extending the system's service life because the recovery and operational limit of the state-of-charge (SoC) of SC have been considered in the power allocation. The operational principle of the proposed control strategy and the system design are elaborated, followed by which real-time simulations are conducted to verify theoretical analyses.
28 August 2019 in IEEE Transactions on Industrial Electronics
In this paper, a decentralized energy management strategy (EMS), which is derived from the conventional droop control, is proposed for the auxiliary power unit composed of multiple fuel cells (FCs) and supercapacitors (SCs) of a more electric aircraft. By utilizing a virtual inductor droop scheme to the FC converter and a virtual resistor droop scheme to the SC converter, the proposed EMS is able to split the load power automatically into low and high frequency components and allocate them to the FC and SC units, respectively. In addition, by optimally designing the droop parameters, accurate power sharing among different source units is achieved. The proposed strategy is not only suitable for extending the service life of the system by adding SoC protection mechanism in the energy management, but also can improve the system reliability as it is compatible for the disconnection of some source units when fault occurs. The operational principle of the proposed EMS and the detailed system design methodology are elaborated, followed by which hardware-in-the-loop simulation study based on Typhoon HIL 602 is done to verify its validity.
22 July 2019 in IEEE Transactions on Transportation Electrification
Multi-pulse autotransformer rectifier unit (ATRU) has been widely used in aviation applications due to its rugged structure, cost effective, and high reliability features. In this paper, up to six types of autotransformers for 18-pulse ATRU are investigated, aiming to provide an optimal selection guideline for a proper structure. By conducting a thorough comparative study on the kVA rating of the autotransformers and current harmonic characteristics over a wide voltage step-up or step-down range, the asymmetric delta-polygon (DP) structure is considered as the most promising choice. Subsequently, an example 18-pulse ATRU with such structure is adopted as the front-end of an AC/AC converter powering an onboard hydraulic pump. After analyzing the operational principle, accurate mathematical expressions among the overall voltage gain K, the total harmonic distortion (THD) of the line current, and the kVA rating of the autotransformer were carefully deduced. Before conclusions, the theoretical analyses were verified by simulations and experiments. It is shown that the THD of the input line current of the designed 10-kW ATRU is 6.74the rated efficiency reaches 98.5%, and the autotransformer’s weight is merely 3.3 kg.
13 February 2023 in IEEE Transactions on Industrial Electronics
For the fuel cell-battery-ultracapacitor hybrid energy storage system applied to the transportation electrification system, its energy management system (EMS) has to achieve the expected energy management objectives, including dynamic load power-sharing, state-of-charge regulation of battery and ultracapacitor, regenerative braking capability, etc. Conventionally, such an EMS is achieved in a centralized or hierarchical way, resulting in poor flexibility, scalability, and reliability. In this article, a completely decentralized EMS, which is achieved based on a modified mixed droop control, is proposed to achieve the above objectives. As the implementation of the proposed EMS does not rely on any communication links or common signals, the system cost is reduced. Besides, the system with the proposed EMS is of high reliability as it can still operate well during the outage of one power source due to malfunction. The operational principle of the decentralized EMS is analyzed in detail, followed by which the system design is elaborated. In the end, the feasibility and effectiveness of the proposed EMS are verified by experimental results.
12 May 2020 in IEEE Transactions on Industrial Electronics