Андрій Валерійович Мовчанюк

Андрій Валерійович Мовчанюк

Auto-generated profile, based on publicly available information

Андрій Валерійович Мовчанюк

Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 December 2021 in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
Verified
Journal Article
Open access
PDF file
SSS. O. Sokolskyi
S. O. Sokolskyi
AMA. V. Movchanyuk
A. V. Movchanyuk
Unmanned aerial vehicles (UAV) or drones are widely used in many areas, but at the same time, the number of offenses with their use began to overgrow. Therefore, the problem of detecting drones is relevant. The study presented in the article aims to compare and critically analyze the main methods and means of detecting small unmanned aerial vehicles. The paper explored the potential of the following drone detection methods: optical, radar, and acoustic methods. The optical method has been found to involve high-resolution cameras during daylight hours but is too dependent on natural environmental factors such as rain or fog. In the dark, infrared optical devices are usually used to detect drones. The main disadvantages of this approach are the low maximum range of target detection and absorption of infrared radiation by the atmosphere, except for ''windows'' with the wavelengths limits of 3-4 and 8-12 mm. As a result of the above calculations, the range of target determination by the optical method is about 230 meters, and with the use of an IR receiver, 73 meters. The radar methods are divided into active and passive. Radar systems can operate at any time of the day and allow detecting low-flying aircraft at distances of up to several kilometers (9.3 km). By analyzing the spectrum of the RF signal, we can get the most detailed information about the target. The main disadvantage of radar methods is that all radars do not work in the near-field zone. It has been determined that acoustic sensors allow efficient detection of small unmanned aerial vehicles, despite the topography of the environment, but the results depend on the available acoustic background noise and interference. The effective target detection range is about 75 meters. The article compares the calculation results, based on experimental data, of the detection range of the small unmanned aerial vehicle «DJI Mini 2 Fly More Combo». In conclusion, the study specifies that the most effective approach is a combination of known methods for detecting UAVs, and recommendations are given regarding the construction of such systems.

1 September 2017
Verified
Conference Paper
Closed access
YVYe. Vistyzenko
Ye. Vistyzenko
AMA. Movchanyuk
A. Movchanyuk
ISI. Sushko
I. Sushko
ANA. Novosad
A. Novosad
Basic principles of LL-type filter modeling and design for piezoelectric transducers are considered. Part of piezoelectric transducer equivalent circuit was integrated with LL-filter scheme and presented in the form of equivalent quadripole. The mechanical transducer resistance is equivalent quadripole load. The analysis proves that the usage of LL-type matching filter allows piezoelectric transducer working both at the resonance frequency and at the parallel resonance frequency. Herewith the mechanical oscillation amplitude is smaller than in the case with L-type matching filter. The minimum of the input impedance doesn't coincide with the mechanical resonance frequency. The theoretical results are confirmed with sufficient accuracy with the experimental verification. It was found that signal proportional both to input filter current and to current of mechanical branch can be used as feedback signal.

1 January 2019 in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
Verified
Journal Article
Open access
PDF file
ISI. O. Sushko
I. O. Sushko
YVYe. V. Vistyzenko
Ye. V. Vistyzenko
AMA. V. Movchanyuk
A. V. Movchanyuk
RAR. V. Antypenko
R. V. Antypenko
ASA. V. Serha
A. V. Serha
Introduction. In modern electronic equipment the inductive seismic receivers (geophones) are the most widespread as sensors for registration of seismic signals. In developing seismic receiving devices, the most significant attention is paid to input amplifiers, which are directly connected to the geophones. Depending on the type of seismic research it is necessary to allocate specific ranges of input frequencies. For filtration and frequency response form correction to geophone is adding additional circuits. Therefore, the work of the geophone should be considered in conjunction with the input cascades of the seismic waves receiver. The main part. The main parameters from the documentation of geophones are analyzed and parameters for the assess of created model adequacy are selected. The analysis was carried out on an example of the model GS-ONE produced by Geospace (USA). The structure of the geophone and the principle of electromechanical analogies for equivalent circuit creating are considered. The equivalent circuit, taking into account parasitic parameters, and the measuring and calculating methods of the schemeelements are given. The influence on the work of the geophone of the shunt resistance connected to the output geophone terminals is considered. The calculation of the circuit elements according to the following method is carried out on the example of the GS-ONE geophone, the amplitude and phase frequency responses as the results of simulation in the package of NI Multisim are introduced. The simulation results are assessed according to their similarity with geophone parameters from documentation. Conclusions. The accuracy of the given model is increased compared to known models [1,2] due to the consideration of the presence of the output geophone branch in the form of inductance coil and its parasitic parameters. This method can be used for equivalent circuit parameters calculation and for modeling in electronic simulation packages. The model does not take into account absolutely all processes in geophone, which leads to deviation in the amplitude values of amplitude frequency response to 8% and the deviation of phase frequency response to 2 degrees. However, further additions to the model will complicate its use in engineering practice and from this point of view it is not expedient.

30 September 2023 in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
Verified
Journal Article
Open access
PDF file
SSS. O. Sokolskyi
S. O. Sokolskyi
AMA. V. Movchanyuk
A. V. Movchanyuk
Small unmanned aerial vehicles (UAVs) rapidly develop and are implemented in various industries to make people’s lives easier. However, there are potential risks in their use, such as unauthorized surveillance of critical infrastructure objects and the delivery of explosive devices, which poses a significant threat to public and national security. The acoustic method promises direction for solving this issue by analyzing the sound characteristics and Doppler shift signatures of UAVs, using microphone arrays and machine learning techniques. The aim of this article is to develop an algorithm for effective detection and classification of drone audio signals using a deep learning convolutional neural network (CNN), constructing its architecture, and evaluating its performance. Before submitting the drone audio dataset into the neural network, the quality of the audio recordings is improved through normalization, Wiener filtering, and segmentation. The audio is segmented into frames with a duration of 25 ms and a 50% overlap, applying Hamming windowing for better accuracy in the time domain, as temporal precision is crucial in audio signal processing. The obtained data is divided into three sets in a 60/20/20 ratio: for training, validation, and testing purposes. Next, the data is represented by a simplified set of features, extracting mel-spectrograms from each frame of the processed audio signals to capture their temporal and spectral characteristics. The frequency range of analysis corresponds to the working frequency limits of the microphone model (20 Hz - 20 kHz), with a frequency resolution of 50 Hz and 30 working mel frequency bands. Using the training data and the extracted audio features, a neural network architecture is developed to investigate the performance of the drone detection and classification algorithm. It consists of 10 pairs of convolutional layers, ReLU activation, batch normalization, and max-pooling layers. The number of these layers is determined by the size of the pooling window along the time dimension. This follows by flattening, dropout, fully connected, and Softmax layers. A classification layer is applied to normalize the output data and obtain final probabilities. The Adam optimizer is chosen for model training. Based on the dataset set, the initial learning rate is set to 0.001, gradually decreasing by a factor of 10 after 75% of the epochs to enhance convergence. The accuracy of the input data recognition reaches 99%, and the F1 score of the trained model is 0.93, indicating a high level of overall architecture performance. The maximum distance of effective detection of drones by the algorithm is 200 m.

10 November 2016
Verified
Conference Paper
Closed access
AMA. Movchanyuk
A. Movchanyuk
VFV. Fesich
V. Fesich
ISI. Sushko
I. Sushko
YVYe. Vistyzenko
Ye. Vistyzenko
The work of L-type matching filters for different methods of detecting the PLL feedback signal and the filter parameter influence on oscillation amplitude of piezoelectric transducer are investigated in this research. The equivalent scheme of quadripole with mechanical resistance load composed of filter and a piezoelectric transducer is designed. The expressions for the input filter impedance and oscillation amplitude of piezoelectric transducer on the input voltage amplitude are obtained by the analysis of the T-shaped equivalent circuit. Relations for matching filter inductance for piezoelectric transducer working at the serial and parallel resonance frequencies are calculated analyzing the expression for the input impedance. Inappropriate use of L-type filter for piezoelectric transducer working at the serial resonance frequency is shown theoretically. The possibility of piezoelectric transducer operating mode with independent of the mechanical load amplitude of mechanical vibrations is given. The adequacy of mathematical modeling is confirmed by the experimental results.

1 February 2020
Verified
Conference Paper
Closed access
AMAndrey Movchanyuk
Andrey Movchanyuk
RARuslan Antypenko
Ruslan Antypenko
ISIryna Sushko
Iryna Sushko
NLNataliia Lashchevska
Nataliia Lashchevska
ASAlina Shulha
Alina Shulha
PLL systems are used to maintain resonance designing control systems for ultrasonic piezoelectric transducers. The nonlinear properties of piezoceramics start to affect increasing the oscillation amplitude of the ultrasonic transducer. It leads to the appearance of the second and higher harmonics of the current through the converter. It is proposed to introduce an active fourth-order bandpass filter (consisting of two second order filters) into the feedback circuit to eliminate errors. Almost flat phase response allows minimizing the phase error in PLL lock range. The synthesis technique and simulation results of such filter are given in this work.