5 May 2022 in IEEE Journal of Selected Topics in Signal Processing
Reconfigurable intelligent surface (RIS) is a promising technology for 6 G networks owing to its superior ability to enhance the capacity and coverage of wireless communications by smartly creating a favorable propagation environment. In this paper, we investigate the potential of employing RIS in dual-functional radar-communication (DFRC) systems for improving both radar sensing and communication functionalities. In particular, we consider a RIS-assisted DFRC system in which the multi-antenna base station (BS) simultaneously performs both multi-input multi-output (MIMO) radar sensing and multi-user multi-input single-output (MU-MISO) communications using the same hardware platform. We aim to jointly design the dual-functional transmit waveform and the passive beamforming of RIS to maximize the radar output signal-to-interference-plus-noise ratio (SINR) achieved by space-time adaptive processing (STAP), while satisfying the communication quality-of-service (QoS) requirement under one of three metrics, the constant-modulus constraint on the transmit waveform, and the unit-modulus constraint of RIS reflecting coefficients. An efficient algorithm framework based on the alternative direction method of multipliers (ADMM) and majorization-minimization (MM) methods is developed to solve the complicated non-convex optimization problem. Simulation results verify the advancement of the proposed RIS-assisted DRFC scheme and the effectiveness of the developed ADMM-MM-based joint transmit waveform and passive beamforming design algorithm.
9 August 2022 in IEEE Transactions on Vehicular Technology
Integrated sensing and communication (ISAC) has been envisioned as a promising technology to tackle the spectrum congestion problem for future networks. In this correspondence, we investigate to deploy a reconfigurable intelligent surface (RIS) in an ISAC system for achieving better performance. In particular, a multi-antenna base station (BS) simultaneously serves multiple single-antenna users with the assistance of a RIS and detects potential targets. The active beamforming of the BS and the passive beamforming of the RIS are jointly optimized to maximize the achievable sum-rate of the communication users while satisfying the constraint of beampattern similarity for radar sensing, the restriction of the RIS, and the transmit power budget. An efficient alternating algorithm based on the fractional programming (FP), majorization-minimization (MM), and manifold optimization methods is developed to convert the resulting non-convex optimization problem into two solvable sub-problems and iteratively solve them. Simulation studies illustrate the advancement of deploying RIS in ISAC systems and the effectiveness of the proposed algorithm.
30 March 2021 in IEEE Transactions on Communications
Intelligent reflecting surface (IRS) is envisioned as a revolutionary technology for future wireless communication systems since it can intelligently change radio environment and integrate it into wireless communication optimization. However, most existing works adopted an ideal IRS reflection model, which is impractical and can cause significant performance degradation in realistic wideband systems. To address this issue, we first study the dual phase- and amplitude-squint effect of reflected signals and present a simplified practical IRS reflection model for wideband signals. Then, an IRS enhanced wideband multiuser multi-input single-output orthogonal frequency division multiplexing (MU-MISO-OFDM) system is investigated. We aim to jointly design the transmit beamformer and IRS reflection for the case of using both continuous and discrete phase shifters to maximize the average sum-rate over all subcarriers. By exploiting the relationship between sum-rate maximization and mean square error (MSE) minimization, the original problem is equivalently transformed into a multi-block/variable problem, which can be efficiently solved by the block coordinate descent (BCD) method. Complexity and convergence for both cases are analyzed or illustrated. Simulation results demonstrate that the proposed algorithm can offer significant average sum-rate enhancement compared to that achieved using the ideal IRS reflection model, which confirms the importance of the use of the practical model for the design of wideband systems.
1 December 2022 in IEEE Transactions on Vehicular Technology
Integrated sensing and communication (ISAC), which allows individual radar and communication systems to share the same spectrum bands, is an emerging and promising technique for alleviating spectrum congestion problems. In this paper, we investigate how to exploit the inherent interference from strong radar signals to ensure the physical layer security (PLS) for the considered multi-user multi-input single-output (MU-MISO) communication and colocated multi-input multi-output (MIMO) radar coexistence system. In particular, with known eavesdroppers' channel state information (CSI), we propose to jointly design the transmit beamformers of communication and radar systems to minimize the maximum eavesdropping signal-to-interference-plus-noise ratio (SINR) on multiple legitimate users, while guaranteeing the communication quality-of-service (QoS) of legitimate transmissions, the requirement of radar detection performance, and the transmit power constraints of both radar and communication systems. When eavesdroppers' CSI is unavailable, we develop a joint artificial noise (AN)-aided transmit beamforming design scheme, which utilizes residual available power to generate AN for disrupting malicious receptions as well as satisfying the requirements of both legitimate transmissions and radar target detection. Extensive simulations verify the advantages of the proposed joint beamforming designs for ISAC systems on secure transmissions and the effectiveness of the developed algorithms.
25 July 2023 in IEEE Transactions on Vehicular Technology
This correspondance studies the physical layer security in a reconfigurable intelligent surface (RIS) assisted integrated sensing and communication (ISAC) system which serves multiple users and tracks a target simultaneously. Specifically, we consider the radar target, as a potential eavesdropper, who eavesdrops on legitimate users information. Artificial noise (AN) is utilized to disrupt eavesdropper reception. We aim at maximizing the achievable secrecy rate of all the legitimate users by jointly designing the transmit beamforming, the AN signals and the phase-shift of RIS. Since the problem is multivariable coupling and non-convex optimization, we adopt deep reinforcement learning (DRL) algorithm to find the optimal learning strategy through agent and environment interactive learning. Numerous results verify that the DRL algorithm can achieve substantial improvement in secrecy rate compared with benchmark approaches.
1 May 2024 in IEEE Transactions on Wireless Communications
Integrated sensing and communication (ISAC) capability is envisioned as one key feature for future cellular networks. Classical half-duplex (HD) radar sensing is conducted in a “first-emit-then-listen” manner. One challenge to realize HD ISAC lies in the discrepancy of the two systems’ time scheduling for transmitting and receiving. This difficulty can be overcome by full-duplex (FD) transceivers. Besides, ISAC generally has to comprise its communication rate due to realizing sensing functionality. This loss can be compensated by the emerging reconfigurable intelligent surface (RIS) technology. This paper considers the joint design of beamforming, power allocation and signal processing in a FD uplink communication system aided by RIS, which is a highly nonconvex problem. To resolve this challenge, via leveraging the cutting-the-edge majorization-minimization (MM) and penalty-dual-decomposition (PDD) methods, we develop an iterative solution that optimizes all variables via using convex optimization techniques. Besides, by wisely exploiting alternative direction method of multipliers (ADMM) and optimality analysis, we further develop a low complexity solution that updates all variables analytically and runs highly efficiently. Numerical results are provided to verify the effectiveness and efficiency of our proposed algorithms and demonstrate the significant performance boosting by employing RIS in the FD ISAC system.