11 May 2021 in Polymers and Polymer Composites
In this study, the method of manufacturing of functionally graded polymer materials based on the mixtures of poorly compatible epoxy resins is suggested. A novel processing method allowing to control the filler distribution across the section of graded materials depending on the operating conditions was developed. The essence of the method is self-settling of the blend consisting of two liquid epoxy resins with different viscosities and densities. Depending on mixing and injecting order the functional additive having antifriction, anti-adhesive or heat-protective properties can be distributed either homogenously or nonuniformly. In the latter case after curing the functionally graded material can be produced. Based on the formulations of poorly compatible phenol novolac epoxy resin NPPN-638 and active diluent triglycidyl phosphate (TGP), new functionally graded polymer materials with continuous change of composition and properties were developed. The functional additive (graphite, glass microspheres, polytetrafluoroethylene powder) concentrates in the top layer of the self-settled epoxy mixture while the bottom layer is enriched by TGP which possess advantaged adhesion to various substrates. As a result, antifriction, anti-adhesive, heat-protective and intumescent flame retardant coatings with improved performance were obtained.
10 March 2025 in Journal of Materials Science
15 February 2024 in Žurnal prikladnoj himii
ЛАЛилия Миниахмедовна Амирова
Лилия Миниахмедовна Амирова
Функционально-градиентные материалы: получение, свойства, применение (обзор) Функционально-градиентные материалы: получение, свойства, применение (обзор)
1 June 2024 in Russian Aeronautics (Iz VUZ)
Prepreg binders based on organophosphorus epoxy-benzoxazine compositions have been developed for the production of low-flammability carbon fiber reinforced
6 January 2026 in Uchenye Zapiski Kazanskogo Universiteta. Seriya Estestvennye Nauki
The process of benzoxazine resin curing in the presence of various catalysts was investigated. The catalytic activities were compared to identify the catalyst that most effectively reduced the benzoxazine curing temperature. The effect of the catalyst content on the curing of benzoxazine was assessed. The activation energies for the curing process were determined. The curing kinetics parameters were calculated from differential scanning calorimetry (DSC) data using Thermokinetics3 software. The possibility to control the temperature front and conversion of the binder through layer-by-layer changing of its composition (by varying the content of the catalyst in the benzoxazine system) across the thickness of the product, and thus altering the binder reactivity, was demonstrated. Based on the results obtained, a single-stage curing mode of benzoxazine binder that shortens the curing cycle through composite molding under dynamic heating conditions was singled out.
28 March 2026 in Power engineering: research, equipment, technology
RELEVANCE . Epoxy foams produced by thermal expansion of polymer microspheres show promise as sandwich panel cores. During secondary heating of epoxy foams, significant shrinkage or thermal expansion may occur, depending on the foam composition. Research and prediction of these processes is necessary for the design of sandwich products with epoxy foam cores. THE PURPOSE . To study the thermal expansion and shrinkage of epoxy foams during secondary heating. To estimate the pressure created in a confined tooling space due to expansion. METHODS . Dynamic mechanical analysis was used to estimate the glass transition temperature of epoxy foams. The foaming process of microspheres was studied using thermomechanical analysis. Thermal expansion and shrinkage were assessed by measuring the linear dimensions and volume of the foam before and after heat treatment. The pressure during the thermal expansion of foam plastics was assessed using pressure sensors and recorded using the DiamonPlus dielectric composite molding process monitoring system (INASCO). RESULTS . It was shown that secondary heating of epoxy foam plastics can cause shrinkage or expansion of the material depending on the microsphere content. Thermal expansion pressure increases with increasing foam plastic density. CONCLUSIONS . The temperature conditions for secondary heat treatment were selected, and thermal expansion studies were conducted for epoxy foam plastics with different microsphere contents and initial densities. It was shown that the initial minimum foam density decreases, while the density after heat treatment increases with increasing microsphere concentration. With an increase in the initial foam plastic density at a constant microsphere concentration, the foam plastic density after heat treatment decreases. For foam plastics with a high initial density and a high microsphere content, anisotropy of expansion and contraction after heat treatment is observed.