22 February 2021 in Journal of Adhesion Science and Technology
The low-velocity impact and bending performance of adhesive joints are critically important for their reliable use in multiple industrial applications. Enhancements of adhesive joints’ mechanical properties are significantly valuable for the long-term safe use and overall life of structural components. This study investigated the low-velocity impact and bending properties of double strap joints (DSJs) reinforced with graphene nanoplatelets (GNPs). In this context, GNP-reinforced adhesives with 1%, 2%, and 3% reinforcement by weight were prepared, and the dispersion quality of graphene was examined using scanning electron microscopy. Subsequently, graphene-modified DSJs were manufactured and mechanical tests were carried out. Low-velocity impact tests were performed at 5 J and 10 J energies in a single impact configuration. Tests of the nonperforated specimens showed that the contact force increased with graphene reinforcement. The absorbed energy and the contact time of the specimens with the impactor tip decreased with nano reinforcement by 5% and 4%, respectively. Additionally, a significant decrease in the displacement was observed with 2% and 3% graphene reinforcements. Significant improvements of up to 58% were observed in the flexural strength of the joints with graphene reinforcement.
2 March 2020 in The Journal of Adhesion
This study performed an experimental modal analysis and investigated the mechanical properties of graphene nanoparticle (GNP)-reinforced, adhesively bonded double strap joints (DSJs). The DP270 structural adhesive was reinforced with graphene nanoparticles by using five different manufacturing methods and bulk specimens were prepared with 1%, 2% and 3% reinforcement by weight. The dispersion of graphene was observed by using scanning electron microscopy (SEM) because its efficient distribution in the adhesive is directly affected by the mechanical and modal properties of the modified polymer. Furthermore, the damping ratios and natural frequencies of the bulk specimens were also determined. Based on the dynamic characteristics and SEM observations, the most appropriate method to manufacture the joints was selected, and DSJs were prepared by using AA 2024-T3 aluminum alloy as the adherend. After that, the modal and tensile properties of the graphene-reinforced DSJs were determined. Consequently, it was observed that a graphene reinforcement ratio of 2% by weight showed a 36% increase in the damping ratio of the adhesive and a 23% increase in the damping ratio of the joint. In addition, it was observed that graphene reinforcement resulted in up to an 81% increase in the failure strength of the modified DSJs.
4 September 2026 in Polymer Composites
This study examines how five veil interlayer materials fine glass (FG), polyether ether ketone (PEEK), polyphenylene sulfide (PPS), polyetherimide (PEI), and polyimide (PI) affect the mechanical performance of carbon and glass fiber/epoxy composites when placed at two laminate positions (near‐surface, 8/2–1; near‐neutral axis, 8/2–2). Composites were fabricated by Vacuum Assisted Resin Transfer Molding (VARTM). Interlaminar shear strength (ILSS) and flexural properties by three‐point bending tests were evaluated per ASTM D2344 and ASTM D790 while the buckling response was evaluated under axial compression in a purpose‐built free‐clamped fixture and reported as the buckling peak force (BPF) at collapse. Fracture surfaces were examined by scanning electron microscopy (SEM). In carbon fiber composites, PEEK at the 8/2–2 position gave the highest ILSS gain (10.9%) and PEI at 8/2–1 produced the largest flexural strength increase (7.16%). The most pronounced buckling improvements came from FG veils at the near‐neutral axis: 17.33% for carbon and 34.83% for glass fiber systems. Near‐neutral axis placement (8/2–2) generally favored buckling resistance and often improved ILSS though material specific exceptions were observed; surface adjacent placement (8/2–1) was more effective for flexural strength in carbon fiber composites. SEM observations associated the performance gains with interfacial morphology, matrix retention, and mechanical interlocking rather than thickness or density changes alone. Carbon fiber composites showed larger ILSS and flexural strength improvements than glass fiber systems whereas the largest buckling gain was obtained in the glass fiber/FG configuration. These results offer practical guidance for veil selection and laminate positioning in composite interfacial engineering.
18 November 2024 in Research Square
This study presents a detailed numerical and experimental investigation into the modal and flexural behaviors of nanocomposite adhesively bonded joints, specifically aluminum 2024 T3 adherents bonded with DP270 adhesive, reinforced with graphene nanoparticles. Initially, a finite element model was developed for the Double Strap Joint (DSJ) to determine its modal properties, and the results were solved using MATLAB. These results were closely aligned with those obtained from both ANSYS simulations and experimental data. Building on this validation, other joint types were analyzed using finite element methods, eliminating the need for additional experiments. The study compared the modal and flexural behaviors of various joint configurations, with particular attention to the influence of graphene reinforcement. Among the configurations, DSJ and Tapered Double Strap Joint (TSJ) exhibited the highest stiffness and load-bearing capacity. The findings suggest that graphene nanoparticles significantly enhance the mechanical performance of the joints, offering valuable insights for various engineering applications.
18 October 2026 in Journal of Engineering Research
1 June 2026 in Journal of the Institute of Science and Technology
In this study, the axial buckling behavior of laminated hybrid composite beams was comprehensively investigated using theoretical and numerical approaches. The main objective of the study is to systematically evaluate the buckling performance of hybrid composite beams with different stacking sequences and geometric perforations. For this purpose, a computational program based on Euler and Timoshenko beam theories was developed in the MATLAB environment and used to calculate critical buckling loads for different boundary conditions, stacking sequences, and perforated configurations. The developed program has the characteristics of a package type tool. The accuracy of the program was validated through comparisons with reference studies available in the literature and finite element analyses performed using ANSYS ACP software. Within this framework, four and eight layer symmetric unidirectional and interply hybrid composites reinforced with carbon and aramid fibers were analyzed under clamped free and pinned pinned boundary conditions. The buckling responses of hybrid beams were comparatively evaluated in MATLAB and ANSYS environments. The results demonstrated that the stiffness distribution along the thickness direction governed by the stacking sequence has a decisive influence on the buckling behavior. For the hybrid configuration exhibiting the highest buckling performance, perforated structure analyses were conducted using equal area circular, square, and hexagonal hole geometries. The findings confirmed the reliability of the developed MATLAB program, while also indicating that perforated configurations lead to a reduction in buckling capacity and that circular hole geometries exhibit a more balanced behavior compared to the other geometries. Overall, this study presents a comprehensive theoretical and numerical investigation of the buckling behavior of laminated hybrid composite beams and enables the systematic evaluation of different boundary conditions and stacking sequences through the developed MATLAB program.