20 June 2023 in Transportation Research Record: Journal of the Transportation Research Board
This paper develops an assessment and optimization model for configuring roadside LiDAR (Line Detection and Ranging) installation. More specifically, an analytic and a simulation model have been developed to analyze the detection blind zones and their impact on vehicle detection and tracking capabilities in Connected and Automated Vehicle (CAV) applications. The proposed model can derive the area and height of the detection blind zones from a given roadside LiDAR location and road geometry. Evaluation metrics are also proposed to assess the severity of the blind zone including laser beam density, blind zone height and duration, vehicle trajectory missing rate and duration. The simulation model can be used to evaluate and identify optimal configurations for different installation scenarios. To validate the proposed model, the 15-min US101 NGSIM (Next Generation SIMulation) dataset was used for validating the proposed model. Different configuration settings were simulated and compared. The evaluation results demonstrate the capabilities of the proposed models in planning for optimal roadside LiDAR sensor installation for vehicle detection and tracking.
12 September 2025 in Transportation Research Record: Journal of the Transportation Research Board
Roadside LiDAR (light detection and ranging) sensors have become increasingly significant in collecting high-resolution trajectory data of vehicles, pedestrians, and other road users, supporting the deployment of connected and automated vehicle applications. These sensors operate effectively under various illumination and weather conditions, providing accurate three-dimensional positioning. However, the raw trajectory data often suffers from quality issues, such as missing segments, misaligned directions, inappropriate appearances, and sudden disappearances. These issues arise from field-of-view constraints, road user or infrastructure occlusions, and sensor or analytic engine limitations. To address these challenges, this paper presents a LiDAR trajectory reconstruction method that utilizes spatial-temporal analysis and shockwave detection to improve incomplete and noisy vehicle trajectories. The method includes a lane-based centerline map-matching algorithm to determine vehicle lane assignments and create lane-by-lane spatial-temporal trajectory diagrams. Fragmented trajectories are matched by analyzing their upstream–downstream continuation relationships. A shockwave detection technique is introduced, which assesses the convexity and concavity of each vehicle trajectory and identifies peaks in curvature. Finally, trajectories are stitched based on estimated vehicle states within regions separated by shockwaves. The proposed model was evaluated using roadside LiDAR trajectory data collected from two intersections during a workday in February 2024 at the DataCity Smart Mobility Testing Ground in New Brunswick, New Jersey. The reconstruction results show promising performance in handling LiDAR coverage blind spots and accurately reconstructing shockwave patterns, as verified by field observations.
6 May 2025 in Transportation Research Record: Journal of the Transportation Research Board
Blind zones in light detection and ranging (LiDAR) sensors arise from their limited physical field of view and obstructions caused by static infrastructure or moving objects. Although originally intended for vehicle-based applications, LiDAR sensors are now increasingly deployed in roadside infrastructure for traffic monitoring and connected and automated vehicle safety and mobility applications. However, there is a dearth of robust tools for analyzing their detection range, resolution, and other characteristics in such settings. This study introduces a three-dimensional (3D) blind zone simulation model for analyzing the detection characteristics of roadside LiDAR sensor deployment. The model replicates the impact of static infrastructure conditions and dynamic blind zones during live traffic. Initially, a real-world digital surface model (DSM) captures 3D data of road surfaces and obstructing infrastructure objects. Optical geometry models then assess blind zone severity across various roadway areas. Subsequent 3D vehicle shape and dynamic simulations evaluate blind zone distributions under typical traffic conditions. The model’s effectiveness is validated using field 3D point cloud data and vehicle detection data collected from a roadside LiDAR site on Route 18 in New Brunswick, NJ. Evaluation results demonstrate the model’s capability in analyzing complex static and dynamic blind zone distributions, offering insights for optimizing LiDAR sensor location, height, tilting angle, and manufacturer configuration parameters to minimize sensing blind zones. For code availability, see https://github.com/rutgerstslab/LiDAR-Coverage-Analysis .
6 August 2024 in IEEE Transactions on Intelligent Transportation Systems
This paper proposes a point cloud background filtering method and explores applications that integrate LiDAR technology into roadside sensor networks, addressing challenges in handling large volumes of sparse and unstructured 3D data. Traditional methods, which classify background points based on descriptive statistics over many frames, are computationally inefficient for roadside LiDAR surveillance. This study introduces a novel approach using hash-based transformation combined with probabilistic Gaussian Mixture Model (GMM) techniques, enhancing the efficiency of high-dimensional multivariate modeling of LiDAR data. This Hash-based Gaussian Mixture Modeling (HGMM) optimizes feature selection and Gaussian components using AIC and BIC scores, mitigating computational burdens and parameter sensitivity. Unlike Cartesian coordinate-based techniques, HGMM processes LiDAR data in Spherical coordinates, preserving meaningful patterns and structures. For infrastructure LiDAR, object detection only pertains to a small amount of data in a fixed environment, allowing background reduction modeling to significantly enhance data chain efficiency by transitioning only a tiny portion of the foreground LiDAR point clouds. The method was tested on diverse LiDAR datasets, including the New Brunswick DataCity Testbed dataset, Transportation Forecasting Competition (TRANSFOR 24) Dataset, DAIR-V2X, and A9-Dataset, demonstrating its adaptability and efficiency across different scenarios. This approach enhances LiDAR sensors’ utility in supporting AI-enhanced decision-making processes and enriching the knowledge base of incorporating LiDAR sensors into current and prospective traffic management strategies.
1 January 2024 in Journal of Advanced Transportation
Nonrecurrent congestion (NRC) events caused by incidents bring unexpected delays and affect normal traffic operations. Imprecise NRC event detection methods can trigger false alarms and repetitive incident alerts for the same congestion event. The speed watershed from the historical profile based on DBSCAN can provide a reference for identifying NRC. This paper proposes a DBSCAN‐based dynamic NRC tracking (DyNRTrac) algorithm to detect and track NRC events. By comparing real‐time spatial–temporal patterns of the speed contour diagram against the historical speed contour diagram along a corridor, this method effectively distinguishes NRC events from regular traffic patterns. The proposed algorithm applies the Rauch–Tung–Striebel smoother for speed noise reduction and establishes a historical congestion profile for each recurrent congestion event within a corridor by each day of the week and season. A new event‐profile–based 3D speed volume comparison method is proposed to detect NRC events that do not significantly overlap with recurrent congestions in the historical profile. Finally, a bilevel congestion confirmation process is introduced for NRC persistency checking and filtering. The proposed algorithm was evaluated by using field travel time data and with the New Jersey Department of Transportation OpenReach incident database. Overall, the proposed model shows up to 88.3% detection rate for NRC that can match the incident in the database, and it shows superior detection rates on NRC events at a similar false alarm rate level when compared with three prior models over the same datasets. Furthermore, a detailed spatial–temporal map analysis is provided to show the capability of the proposed method in distinguishing NRC and RC and identifying nonaccidental NRC events, providing its potential for traffic operation management systems to assist traffic operators to be alerted about NRC events.