Integrated Sensing And Communication (ISAC) has been recognized as a promising technology in the 6G communication. A realistic channel model is a prerequisite for designing ISAC systems. Most existing channel models independently generate the communication and sensing channels under the same framework. However, due to the multiplexing of hardware resources and the same environment, signals enabled for communication and sensing may experience shared propagation scatterers. This practical sharing feature necessities the joint generation of communication and sensing channels for realistic modeling, where the shared clusters (contributed by the shared scatterers) should be reconstructed. In this paper, we first conduct communication and sensing channel measurements for an indoor scenario at 28 GHz. The power-angular-delay profiles of multipath components are obtained, and the shared scatterers by communication and sensing channels are intuitively observed. Then, a stochastic ISAC channel model is proposed to capture the sharing feature, where shared and non-shared clusters by the two channels are defined and superimposed. To extract those clusters from measured ISAC channels, a KPowerMeans-based joint clustering algorithm is novelly introduced. Finally, stochastic channel characteristics are analyzed, and empirical simulations validate that the channel Sharing Degree (SD) increases with more shared clusters. The proposed model can realistically capture the sharing feature of ISAC channels and is able to evaluate and simulate the channel SD values, which is valuable for the design and deployment of ISAC systems.
7 May 2024 in IEEE Wireless Communications Letters
Integrated Sensing and Communication (ISAC) is a promising technology in 6G systems. The existing 3D Geometry-Based Stochastic Model (GBSM), standardized for 5G systems, addresses solely communication channel and lacks consideration of the integration with sensing channel. Therefore, this letter extends 3D GBSM to support ISAC research, with a particular focus on capturing the sharing feature of both channels, including shared scatterers, clusters, paths, and similar propagation parameters, which have been experimentally verified in our previous work. The proposed approach can be summarized as follows: Firstly, we propose an ISAC channel model that combines shared and non-shared clusters, where the former co-exist or disappear for communication and sensing. Secondly, to characterize the target, the sensing channel is modeled as a cascade of Tx-target link, target-Rx link, and target scattering response. A novel parameter S is introduced for the extraction of shared targets/scatterers and clusters. Finally, an ISAC channel implementation framework is proposed, allowing flexible configuration of the sharing feature and the joint generation of communication and sensing channels. The proposed ISAC channel model can be well-compatible with the 3GPP standards and offers promising support for ISAC technology evaluation.
6 October 2025 in IEEE Transactions on Cognitive Communications and Networking
Integrated Sensing And Communication (ISAC) has been identified as a key 6G application by International Telecommunication Union (ITU) and 3rd Generation Partnership Project (3GPP), with standardization efforts already underway. Sensing tasks, such as target localization, demand more precise characterization of the sensing target (ST) in ISAC channel modeling. The ST couples complexly with environmental scatterers, potentially blocking some multipaths and generating new ones, resulting in power variations compared to the original channel. To accurately model this effect, this paper proposes and validates a coupled ISAC channel model based on measurements. In this work, we first conduct ISAC channel measurements in an indoor factory scenario at 105 GHz, where the multipath power variations caused by the ST’s interaction with the environment are clearly observed. Then, we propose an ISAC channel modeling framework that incorporates two novel parameters: the Blockage-Region Coupling Factor (BR-CF) and the Forward-Scattering (FS)-CF, which characterize the spatial region and intensity of the coupling effect, respectively. Finally, the proposed model is validated through similarity comparison with measured data, demonstrating higher accuracy for both LoS and NLoS scenarios compared to the uncoupled model. This realistic ISAC channel model provides an effective framework for capturing the ST-environment coupling effect, supporting the design and evaluation of ISAC technologies.