The interdisciplinary field of assessing the impacts of sound on marine life has benefited largely from the advancement of underwater acoustics that occurred after World War II. Acoustic parameters widely used in underwater acoustics were redefined to quantify sound levels relevant to animal audiometric variables, both at the source and receiver. The fundamental approach for assessing the impacts of sound uses a source-pathway-receiver model based on the one-way sonar equation, and most numerical sound propagation models can be used to predict received levels at marine animals that are potentially exposed. However, significant information gaps still exist in terms of sound source characterization and propagation that are strongly coupled with the type and layering of the underlying substrate(s). Additional challenges include the lack of easy-to-use propagation models and animal-specific statistical detection models, as well as a lack of adequate training of regulatory entities in underwater acoustics.
1 July 2009 in The Journal of the Acoustical Society of America
The frequency response of an oscillating structure can be tailored by attaching one or more subordinate oscillators. This paper shows how the magnitude and phase of the frequency response can be deliberately shaped by prescribing the distributions of the dynamic properties in an array of such subordinate oscillators. Exact analytic governing equations of motion are derived for the coupled system composed of the primary system and the subordinate array. For a relatively small number (<100) of attached oscillators whose total mass is small (<1%) relative to the primary structure, it is possible to engineer frequency-response functions of the primary oscillator to have, for example, nearly linear phase or constant amplitude over a frequency band of interest. The frequency range over which response shaping is achieved is determined by the band of the attached oscillators. It is shown that the common analytic methodology for designing a dynamic vibration absorber represents the limiting case of a single oscillator in the subordinate set. Moreover, increasing the number of subordinate oscillators (without increasing the total added mass) offers a number of advantages in reshaping the dominant system’s frequency response.
Numerical simulation is used to explore the sensitivity to measurement noise of a mass detection approach that uses eigenmodes of an array of nominally identical micro- or nanomechanical resonators. The mode shapes are perturbed to simulate measurement noise, and resulting errors in identifying variations in mass are quantified as a function of array size, coupling strength, and level of mass variation. Sensitivity to measurement noise is low for lightly coupled arrays of nearly identical elements and increases when mass variation causes significant mode localization. For any mass variation level, an optimal combination of array size and coupling strength minimizes noise sensitivity.
1 August 2013 in The Journal of the Acoustical Society of America
The transient response of a resonant structure can be altered by the attachment of one or more substantially smaller resonators. Considered here is a coupled array of damped harmonic oscillators whose resonant frequencies are distributed across a frequency band that encompasses the natural frequency of the primary structure. Vibration energy introduced to the primary structure, which has little to no intrinsic damping, is transferred into and trapped by the attached array. It is shown that, when the properties of the array are optimized to reduce the settling time of the primary structure's transient response, the apparent damping is approximately proportional to the bandwidth of the array (the span of resonant frequencies of the attached oscillators). Numerical simulations were conducted using an unconstrained nonlinear minimization algorithm to find system parameters that result in the fastest settling time. This minimization was conducted for a range of system characteristics including the overall bandwidth of the array, the ratio of the total array mass to that of the primary structure, and the distributions of mass, stiffness, and damping among the array elements. This paper reports optimal values of these parameters and demonstrates that the resulting minimum settling time decreases with increasing bandwidth.
This work presents a numerical study on atmospheric sound propagation over rough water surfaces with the aim of improving predictions of sound propagation over long distances. A method for generating pseudorandom sea profiles consistent with sea wave spectra is presented. The proposed method is suited for capturing the logarithmic nature of the energy distribution of the waves. Sea profiles representing fully developed seas for sea states 2, 3, 4, and 5 are generated from the Elfouhaily et al. (ECKV) sea wave spectra. Excess attenuation caused by refraction and surface roughness is predicted with a parabolic equation (PE) solver. A novel method for estimating equivalent effective impedance based on PE predictions at different sea states is presented. Parametric expressions using acoustic frequency and significant wave height are developed for effective surface impedances. In this work, sea surface roughness is on a scale comparable with the acoustic wavelength. Under this condition, the acoustic scattering is primarily incoherent. This work shows the limitations of using an equivalent surface impedance in such incoherent scattering cases.
Mechanically coupling microscale or nanoscale resonators in more than one dimension requires a departure from classic beam resonator designs. A square paddle resonator is a simple geometry that allows easy coupling into two-dimensional arrays. These resonators can have high quality factors in the fundamental vibration mode if operated in vacuum. In this paper we summarize the behavior of such a resonator and describe several design considerations. We develop an expression for the inter-resonator coupling in terms of coupling beam geometry, estimate energy dissipation due to a variety of physical mechanisms, and empirically determine the vibration amplitude at which geometric nonlinearity becomes significant. Future experimental studies can exploit the expressions presented here, which facilitate design of two-dimensional arrays of square-paddle resonators that will be useful for a variety of potential applications.