20 October 2020 in IEEE Transactions on Power Electronics
This paper firstly developed an inductance model that includes the parasitic mutual inductance between parallel current path segments for SiC multichip power modules. Based on the developed model, the SiC multichip module's transient response was analyzed, important parasitic inductances were identified. The layout was improved based on transient analysis. The improved package layout can reduce the parasitic inductance without increasing the fabrication difficulty. Experiments were conducted to validate the reduction of parasitic inductances. The parasitic ringing and the crosstalk effect were significantly reduced with the proposed technique. The thermal performance was also improved with the proposed layout.
17 June 2021 in IEEE Transactions on Power Electronics
The drain to gate capacitance (Miller capacitance) of SiC MOSFETs leads to the Miller effect during switching transients. The Miller capacitance in a phase-leg configuration causes the crosstalk, the interaction between the two complementary switches, and the Miller plateau during the switching transient. The Miller effect reduces the switching speed, reduces reliability, and increases electromagnetic interference. In this paper, by injecting a mirror cancellation current, the effects of Miller capacitance are canceled. The proposed technique includes a two-stage sensing and injection network to compensate for the non-linearity of the Miller capacitance. The proposed technique can suppress both positive and negative gate voltage spikes induced by the crosstalk and reduce the switching power loss with the increased switching speed. Because no external control signals are required in the proposed technique, it can work with almost all commercial gate drivers. The detailed design for this proposed technique is presented in the paper. The proposed technique was validated with both simulations and experiments.
5 September 2018 in IEEE Transactions on Power Electronics
This paper investigates the magnetic field immunity and near magnetic field reduction for different inductor winding structures. A double-twisted winding structure, which includes two magnetic cores, is proposed for CM inductors. The proposed CM inductor can achieve much lower near magnetic field emission, much better magnetic field immunity against the external magnetic field and much bigger DM impedance than conventional winding structures. The proposed inductor structures are good for high power density applications. Theoretical analysis, magnetic 3D simulations and experiments were conducted to validate the developed theory and technique.