1 October 2017 in Physics of Fluids
In this research article, we investigated the phenomena of a buoyancy-driven cross-flow impinging on a bulk flow from the inlet for a flow past a pair of side-by-side square cylinders in a confined channel wall (which are kept in an adiabatic condition), a special case of an “internal flow” type problem. The density difference in the flow was achieved through a subtle temperature difference between the ambient fluid and the solid walls present in the domain. The study has been carried out at the Reynolds number Re = 1–40 for a transverse gap ratio s/d = 0.7–10 and the Richardson number Ri = 0–1 at a constant value of the Prandtl number Pr = 50. During a rigorous parametric study, we found that the mixed convection not only brings an early unsteadiness in the flow but also fetches an early formation of different flow regimes at Re = 40. An effort has been made to identify the precise near-wake formations leading to the vortex shedding processes in a mixed convection flow for a various range of s/d values. Different flow regimes can be identified efficiently through a unique combination of occurrences for dominant frequencies in terms of the Strouhal number St of primary, secondary, and harmonic frequencies in the flow. The time variant lift plots indicate that the unsteady periodicity in the flow varies from sinusoidal nature at s/d = 0.7 (single body type flow) to square wave (non-sinusoidal periodic waveform) for s/d = 1.5 (chaotic flow) and finally getting back to sinusoidal at s/d = 6 (non-interacting flow). We have also encountered the drastic pattern changes in the flow which occurred due to the onset of recirculation followed by the transition of steady to unsteady periodic nature with Re = 1–40 for all the values of s/d. This case is analyzed in detail through the study of various flow parameters.
1 June 2018 in Physics of Fluids
In this research article, we have analyzed the effect of thermal stratification of shear layers due to mixed convection heat transfer past a pair of side-by-side square cylinders in a confined domain, an extended part of our recent study [A. Sanyal and A. Dhiman, “Wake interactions in a fluid flow past a pair of side-by-side square cylinders in presence of mixed convection,” Phys. Fluids 29, 103602 (2017)]. Investigations from the studies of instantaneous and time-averaged isotherms revealed the actual stretches of the temperature gradient in streamwise and transverse extents at Re = 1–40, Ri = 0–1, s/d = 0.7–10, and Pr = 50. The effects of “baroclinic production,” embedded in the transport of vorticity, were rigorously analyzed through the determination of local period-averaged vorticity flux at a certain cross section in the near-field downstream. The study also revealed the underlying flow physics pertaining to the variations in period-averaged wall vorticity and the local Nusselt number. The transport of vorticity has been explained in terms of the vortex structure formulations, and because of the absence of any such similar studies for multiple bluff-body arrangements, the study has been thoroughly correlated from the cases of single bluff-body flow. In an attempt to control several flow regimes by slightly changing the flow and thermal parameters, it is found that chaotic flow cannot exist beyond a certain value of s/d. However, an abnormality was noted in terms of the flow bifurcations at s/d = 1.5 at the juncture of flow transition from unseparated to a separated steady flow for the first time and this is solely attributed to the effect of thermal buoyancy in the flow field.
1 May 2020 in Physics of Fluids
In this article, investigations have been carried out to decipher the effect of thermal buoyancy in a viscosity stratified flow field for a shear-thinning fluid flowing past a pair of heated side-by-side square cylinders, which is an extension part of our recent study [Sanyal, A. and Dhiman, A., “Wake interactions in a fluid flow past a pair of side-by-side square cylinders in presence of mixed convection,” Phys. Fluids 29, 103602 (2017)]. It is found that the leading-edge flow-separations from the square cylinders influence the near-wake structures and vortex shedding patterns in the presence of shear-thinning effects, which is otherwise missing for Newtonian fluid flow at Reynolds number Re = 40 and Richardson number Ri = 1. The distribution of wall-viscosity η along the inner surfaces of the side-by-side square cylinders, at different values of transverse spacings s/d and flow-behavior indices n, hints at large dependency on the inflections in the velocity profile within the gap-flow region. Under thermal buoyancy-driven mild shear-thinning flow conditions (n = 0.6 and 0.8), the gap-flow characteristics have been classified into “pressure-driven” and “momentum-driven” flow regimes, which provides a good explanation for the aberrations noted in the distribution pattern of η. The root-mean-square fluctuations of the velocity-magnitude and vortex shedding phenomenon are found to reciprocate a consistent flow physics associated with a shear-thinning flow at near and far-field downstream. The single body deflected type flow is primarily seen under predominant shear-thinning flow conditions (n = 0.4), compared to chaotic or quasi-periodic flow under mild shear-thinning conditions. Besides, the evolution of non-linear dynamics-based flow regimes (classified with respect to s/d using power spectrum density analysis) at different values of n and s/d is thoroughly summarized. The time-variant fluctuations of lift and drag force parameters are also found to be unified through cause and effects.
1 April 2021 in Physics of Fluids
The present article aims to decipher the effect of preheating a segment of the pipe on the pressure propagation mechanisms and flow restart operation in a gelled pipeline. During the restart operation, shear-thinning thixotropic rheology governs the gel properties, where the viscosity is a function of shear strain and thermal history. A finite volume method is employed to solve the governing equations for a weakly compressible gel. Rheology of the initial gel incorporates the effect of temperature distribution from the preheating stage. Flow restart in the thixotropic gel involves three different timescales: namely, the compressive diffusion timescale (acoustic wave propagation timescale), the viscous timescale, and the gel degradation timescale. In an isothermal case, the flow restart occurs at the gel degradation timescale, whereas flow restart in the preheated gel takes place at the viscous timescale. Time evolution of nonlinear axial pressure profile and residual viscosity provides a theoretical understanding of the gel degradation process in the thermal diffusion-controlled and advection-controlled flow regimes, defined in terms of Peclet number (Pe). The results indicate that the gel degradation process is affected by thermal-induced melting in addition to shear melting. Partial preheating tends to dislodge the gel into plugs, and this is more significant at low Pe and high pristine gel strength. The local Nusselt number (Nu) at the heated portion of the wall during flow restart suggests that the wall-heat transfer is prominent when the pressure wavefront has not reached the outlet.
18 July 2022 in Journal of Petroleum Science and Engineering
28 September 2021 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
An analysis has been carried out to understand the consequences of side-by-side gap-ratio on thermal buoyancy-assisted two-dimensional flow past a pair of heated circular cylinders for a dominant viscous flow field. This is implemented through studies at Reynolds number (Re) ranging from 5 to 40, Prandtl number (Pr) 0.7, gap-ratio (T/D) 1.5 to 4 and Richardson number (Ri) 0 to 1. An ANSYS-based incompressible flow solver is used with Boussinesq approximation to account for density variations in the momentum equation. One can realize features like the steady-separated and steady-unseparated flow on varying flow and thermal parameters. Unlike streamlines, non-interacting isotherms are non-existent in the current numerical framework. The influence of gap-ratio on enhancement in Nusselt number (Nu) is the best realized at T/D = 1.5 and buoyancy-aided effects play a dominant role for enhancement in Nu at diffusion and/or viscous-dominant conditions occurring at Re = 5. Correlations are developed to quantify the impact of T/D, Re, and Richardson number Ri on Nu. For the first time, Nu’s correlation based on varying side-by-side gap-ratio has been stated in a single expression. Finally, a comparison for the heat transfer enhancement/reduction in Nu under a similar numerical framework is provided with cases of high-Pr flow and/or different relatable flow arrangements for circular and square cylinders.