19 June 2014 in Road Materials and Pavement Design
Based on knowledge and findings that existing binder tests may not accurately predict cracking performance at intermediate temperatures, this study embarked in the development a new binder fracture energy test to fill this void. Nonlinear 3-D finite element analysis (FEA) was used to identify and optimise an appropriate specimen geometry to allow for accurate determination of true stress and strain on the fracture plane, thereby ensuring accurate determination of fracture energy. Various binders were tested at multiple temperatures and loading rates using prototype specimens in order to evaluate the feasibility and validity of different specimen geometries. The researchers used nonlinear FEA results to establish a data interpretation system and develop a set of diagrams to simplify calculation procedures. After extensive observation of test results, the researchers concluded that the new fracture energy test and data interpretation system suitably measure unmodified and modified binder fracture energy density. The test results reveal that binder fracture energy is a fundamental property of binder and that characteristic of the true stress-true strain relationship is a good indicator of the presence and relative content of modifiers.
1 January 2010 in Transportation Research Record: Journal of the Transportation Research Board
Fracture energy of asphalt mixture is known to have a strong influence on the cracking performance of flexible pavement. Accurate determination of fracture energy of laboratory specimens requires accurate determination of strain through fracture, at the instant of fracture, on the plane where fracture occurs. Tests involving nonuniform stress states, such that the failure plane is known a priori, are suited for accurate and consistent determination of fracture energy because gauges from which strains can be determined can be placed directly on the failure plane. The Superpave®d; indirect tension (IDT) test and the recently developed dog-bone direct tension (DBDT) test fall into this category. They were used in this study to determine tensile failure limits and, more specifically, to test whether fracture energy determined from one of the tests agreed with that from the other test and thereby indicated that fracture energy can be accurately determined from these tests. Strength tests were performed at constant rate of load ram displacement on dense- and open-graded asphalt mixtures for a range of temperature and aging conditions. Results showed that although tensile strength and failure strain between Superpave IDT and DBDT tests were different, because of differences in loading rate on the failure plane, the resulting fracture energy from the two tests was the same. This supports earlier findings that fracture energy is a fundamental property that is independent of stress state or loading conditions and, perhaps more important, that either one of these tests can be used to determine fracture energy of asphalt mixture accurately.
8 January 2021 in Materials and Structures
1 December 2020 in Delectus
PMPerú Universidad Nacional Santiago Antúnez DE Mayolo
Perú Universidad Nacional Santiago Antúnez DE Mayolo
El objetivo general de este trabajo fue determinar la percepción que tienen los estudiantes sobre las competencias del docente universitario, según los factores de planificación, conducción y valoración del proceso de enseñanza aprendizaje. El diseño de investigación es no experimental, transversal y descriptivo; para lo cual se utilizó como instrumento de recolección de información la encuesta; la muestra para el estudio equivale a 250 alumnos del semestre 2019-II de la Escuela Profesional de Ingeniería Civil de la Facultad de Ingeniería Civil de la Universidad Nacional Santiago Antúnez de Mayolo, Huaraz Perú, seleccionados mediante el muestreo aleatorio simple. Los resultados del estudio muestran que los estudiantes en un 54.4% han percibido las competencias de los docentes a nivel general como bueno y muy bueno, lo que significa una aproximación significativa del proceso de enseñanza aprendizaje de acuerdo a las exigencias para lograr un nivel de calidad de la enseñanza universitaria. Palabras clave: evaluación; competencias; percepción; docente; estudiantes.
30 June 2022 in APORTE SANTIAGUINO
El objetivo del estudio es evaluar y determinar los niveles de riesgo por inundación en el barrio Nueva Florida de la ciudad de Huaraz. La presente investigación es de enfoque cuantitativo de alcance correlacional, del tipo no experimental transversal, habiéndose evaluado el área comprendido de la zona urbana entre los ríos Paria y Quillcay, con una muestra de 116 viviendas. Se ha utilizado la metodología de evaluación de riesgos originados por fenómenos naturales, donde se analizan los parámetros de evaluación y susceptibilidad de los peligros; se analiza la vulnerabilidad de elementos expuestos, y se determinan y zonifican los niveles de riesgos. Los resultados obtenidos del mapa de niveles de riesgo por inundación pluvial indican que se tienen valores de nivel de riesgo muy alto (rango 0.77 a 0.212) y nivel de riesgo alto (rango 0.023 a 0.077). La conclusión del estudio indica que se presentan niveles de riesgo muy alto y riesgo alto por inundación pluvial, por lo tanto, el nivel de aceptabilidad y tolerancia del riesgo identificado en el sector de Nueva Florida, ha sido priorizado como inaceptable, el cual indica que se deben desarrollar actividades inmediatas y prioritarias para el manejo de riesgos.
1 September 2025 in International Journal of Advances in Applied Sciences
One of the main engineering challenges has been to design an economical soil retaining structure with high seismic resistance. From this perspective, reinforced soil walls have been developed with a focus on flexibility, in order to efficiently resist the effects of similar historical events in the event of a significant earthquake. The overall objective of this study was to compare the structural behavior of a geogrid-reinforced soil wall (Terramesh® system) under static and pseudo-static loads, and in a seismic environment simulated using the finite element method, in a shopping center in Trujillo, Peru. A case study was conducted using a mixed methodology, both applied and analytical-comparative in scope. Furthermore, the finite element methodology, material constitutive modeling, and dynamic time-history analysis of modal structures were chosen. It was determined that seismic loading can produce a 53.33% increase in deformations compared to the static state; Likewise, the overall safety factor under dynamic conditions tends to decrease by 27.85% compared to the static case. This study demonstrated the scope of geogrid reinforcement (Terramesh® system) through a practical case of a reinforced soil wall, using Plaxis 2D software to compare, estimate, and compare structural behavior in static, dynamic, and simulated environments.