Explore full metrics on Scilit
(Calculated once Scilit publication data is synced: current year − year of first publication + 1)
<mml:math display="inline"><mml:mrow><mml:msub><mml:mi>La</mml:mi><mml:mrow><mml:mn>0.6</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mi>Sr</mml:mi><mml:mrow><mml:mn>0.4</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mi>Co</mml:mi><mml:mrow><mml:mn>0.2</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mi>Fe</mml:mi><mml:mrow><mml:mn>0.8</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mrow><mml:mn>3</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>La0.6Sr0.4Co0.2Fe0.8O3 (LSCF6428) cathode have been investigated. It was found that chromia-forming metals caused significant fade in power density due to the chrome poisoning, while alumina-forming alloys exhibited no influence on the cell degradation. This degradation caused by the chrome poisoning was accelerated at higher operating temperatures. Microstructural analysis conducted on the cells tested with chromia formers exhibited the formation of a strontium chromate phase in the entire cathode, leading to the homogeneous distribution of Cr in the cathode. Although the Mn-containing chromia former such as Crofer22 formed a continuous layer of the <mml:math display="inline"><mml:mrow><mml:mi>Cr</mml:mi><mml:mo>–</mml:mo><mml:mi>Mn</mml:mi></mml:mrow></mml:math>Cr–Mn oxide scale on the mesh surface, it was not effective enough to prevent Cr poisoning of the cathode. In contrast, alumina formers such as Haynes214 and Kanthal formed a continuous layer of the alumina scale, resulting in no Cr contamination in the LSCF6428 cathode.<mml:math display="inline"><mml:mrow><mml:mi>CuO</mml:mi><mml:mtext>-</mml:mtext><mml:mi>Ag</mml:mi><mml:mtext>-</mml:mtext><mml:msub><mml:mi>TiO</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>CuO-Ag-TiO2 braze compositions. Metallographic analysis revealed that a majority of the CuO in the braze preferentially migrates to the braze/Fecralloy interface, indicating a stronger affinity and interaction between the CuO and the alumina scale that had formed on the Fecralloy than with the YSZ substrate. The addition of <mml:math display="inline"><mml:mrow><mml:msub><mml:mi>TiO</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>TiO2 to the braze had no significant effect on the microstructure or mechanical properties of the YSZ/Fecralloy joints, unlike what had been observed previously in YSZ/YSZ joining. Four-point bend tests indicated that joint strength improves with increasing CuO content up to 8 mol % CuO, the maximum concentration of copper oxide tested, likely due to the concomitant improvement in braze wettability. A maximum bend strength of 101 MPa was achieved using the 8 mol % CuO braze composition, demonstrating the feasibility of this joining technique for sealing planar SOFCs.