The wear behavior of Al-10 wt. %, SiCmicro-x wt. %, SiCnano (x = 0, 1, 3, 5 and 7) hybrid nanocomposites were investigated. The effects of nano-silicon carbide (SiC) addition, the sliding distance and the applied load were studied in factorial design (5 × 3 × 2) of experiments. The influence of SiC, the sliding distance and the applied load were found to be 42.4, 42.3 and 11.3%, respectively. The wear resistance of the nanocomposite reinforced with 5 wt. % SiC nanoparticles was the best amongst all the synthesized nanocomposites. The worn surfaces and wear debris were analyzed using both scanning electron microscopy (SEM) and electron dispersive spectroscopy (EDS). Five different regression models were also developed to estimate the tribological behavior of composites with nano-silicon carbide (SiC) reinforcement, the sliding distance and the applied load as inputs. The accuracy of these models was evaluated using the five most commonly applied statistical indicators. The models were ranked according to their suitability for prediction using the Global Performance Indicator. The predicted values and experimental data showed a high degree of association. It was determined that the developed models could be used to predict wear behavior within the range of the investigation.
1 August 2017 in IOP Conference Series: Materials Science and Engineering
In this study, Nano-composites have been synthesized in which PMMA is the matrix material and calcium carbonate nanoparticles as the filler by In-situ polymerization reaction. Nano-CaCO3 added during polymerization and the quantity of nano-CaCO3 varied as 0.2, 0.4 and 0.6 wt. % of monomer quantity. The Nano-composites were prepared at three distinct stirring speeds 600, 800, 1000 rpm in order to observe the property with respect to stirring speeds. XRD gram depicts that the presence of nano-CaCO3 has given crystalline nature to Nano-composites. The effects of different concentrations of nano-CaCO3 loading on PMMA morphology were studied by using scanning electron microscope (SEM). The mechanical property is increasing with the stirring speed and concentration. Relative to neat PMMA a 62% increase in impact strength were observed in PMMA based Nano-composites using 0.6 wt.% nano-CaCO3.