High-frequency and high-magnitude common mode voltage (CMV) generated by the operation of transformerless multilevel converters is one of the main causes for decreasing the lifespan of ac motors. In this article, the principle of CMV generated by rectifier and inverter stages of a recently proposed transformerless unidirectional three-level converter for ac motor drives is studied, a modified carrier-based pulsewidth modulation strategy for both CMV elimination and neutral point (NP) voltage balance is proposed. The strategy can effectively eliminate the CMV of the system by modifying the pulse voltage generation and replacing the phase of the carrier signal of the two active switches in the three-level power circuit according to the polarity of each phase current. Moreover, by superposing the NP voltage balance control signal onto the reference voltage of those selected active switches (whose switching action has no impact on the CMV) in the rectifier stage, the NP voltage balance control is integrated into the CMV elimination. The merit of this method is that it does not require the complex calculation of phase shift position and has little impact on the multilevel voltages of the rectifier and inverter stages. The experiments verified the effectiveness of the method.
5 November 2024 in IEEE Transactions on Industrial Electronics
High-speed on / off valves (HSVs) are characterized by their simple structure, high reliability, and insensitivity to contamination. However, the driving power and flow constraints limit their application in the fully mechanized mining face control system. To apply HSVs in the mining face, a novel two-stage structure for the HSV, incorporating an internal feedback channel, is proposed in this study. This design allows control with meager driving power, rapid response, and a larger flow capacity. A state-space modeling approach is employed in this study to analyze the dynamic response of the internal poppet spool. Additionally, an equivalent magnetic circuit model is developed for the driving electromagnetic solenoid, and the solenoid’s mathematical modeling is verified through finite element simulations and experiments. Utilizing mathematical models and considering response time and flow rate as objective functions, the electromagnetic solenoid and valve structures are optimized using the electric eel foraging optimization algorithm. The final design specifications are obtained by further analyzing the optimized design parameters. A prototype is manufactured and subjected to experimental validation. The experimental results demonstrate that the proposed structure achieves an opening time of 5 ms, a closing time of 5 ms, and a flow rate of 20 L/min.
1 August 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Aiming at the difficulty of voltage balancing control of four dc-link split capacitors in a recently proposed transformerless unidirectional five-level (5-L) converter for ac motor drives, a novel dc-link capacitor voltage control based on coordination of rectifier-inverter stage is proposed. To facilitate the independent voltage control of four dc-link split capacitors, in the rectifier stage, two additional diodes are added to each single-phase rectifier. Compared with those similar control for the same purpose such as those requiring adding additional bulky storge components, or those by utilizing non-nearest vectors and virtual medium-vectors to achieve PWM control which will cause higher harmonics in the output and larger switching loss, this proposed coordinated control can achieve the dc-link capacitor voltage balancing control under full operating range with simple implementation, reduced calculation and better performance due to the coordination. In this paper, the basic operating principle of the modified 5-L rectifier is comprehensively analyzed, the voltage imbalance mechanism of four dc-link split capacitors and the balancing principle of the proposed coordinated control are discussed in detail. Simulations and a downscaled (2.2kW) prototype experimental results are provided which validate the feasibility and advancement of the proposed topology and the corresponding coordinated control strategy.
9 January 2025 in IEEE Transactions on Industrial Electronics
The issue of unbalanced neutral-point voltage hinders the widespread application of five-level neutral-point clamped (NPC) converters in industry. A unidirectional five-level converter for ac motor drives was recently proposed. This converter takes a modified five-level boost rectifier as the front-end for input power factor correction. The neutral-point voltage balance is achieved by a complex control coordination between the rectifier stage and inverter stage. In this article, a simplified voltage balancing control strategy is proposed, first, the voltage balancing capacity of the rectifier stage is analyzed; then, considering that the traditional phase-disposition pulse width modulation (PDPWM) has low-output voltage total harmonic distortion (THD) but will cause the drift of neutral-point voltage, while the carrier-overlapped PWM (COPWM) can balance the neutral-point voltage in the full operating range, but has a higher output voltage THD, a carrier-overlapped phase-disposition PWM (COPDPWM), and a hybrid modulation strategy based on segmented combination of PDPWM, COPDPWM, and COPWM for the inverter stage are proposed. The strategy can greatly reduce the unbalanced degree of the neutral points currents to the level that can be fully compensated by the rectifier stage and has little impact on output voltage THD. The experimental results verify the validity of the proposed hybrid modulation strategy.
20 August 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Discontinuous pulse width modulation (DPWM) applied to Vienna rectifier faces two challenges: one is how to compromise between reducing switching losses and suppressing input current distortion; the second is how to effectively control the neutral-point (NP) potential. To address these issues, a carrier based loss-optimized DPWM (LO-DPWM) strategy is proposed. By shifting the clamping region of the minimum switching loss DPWM (MSL-DPWM) and injecting zero-sequence components twice, the length of the zero-clamping region is shortened compared to the existing discontinuous modulation method for Vienna rectifier and reduced portion is changed to the clamped phase with the higher absolute input current, which is conducive to further reducing switching losses while ensuring that the input current does not exhibit zero-crossing distortion. Additionally, by adjusting the shift angle, the length of the zero-clamping region can be modified to control the NP voltage balance without introducing additional switching losses. The effectiveness of the proposed LO-DPWM strategy is verified by simulation and experiment. The results indicate that the proposed strategy can eliminate the input current zero-crossing distortion, achieve the optimized system efficiency compared to other modulation strategies, and have the capability of NP voltage balancing control.
20 July 2025 in International Journal of Circuit Theory and Applications