Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic with zero static power consumption and very small switching energy. In this paper, we report a new AQFP cell library designed using the AIST 10 kA cm −2 Nb high-speed standard process (HSTP), which is a high-critical-current–density version of the AIST 2.5 kA cm −2 Nb standard process (STP2). Since the intrinsic damping of the Josephson junction (JJ) of HSTP is relatively strong, shunt resistors for JJs were removed and the energy efficiency improved significantly. Also, excitation transformers in the new cells were redesigned so that the cells can operate in a four-phase excitation mode. We described the detail of HSTP and the AQFP cell library designed using HSTP, and showed experimental results of cell test circuits.
We herein build an adiabatic quantum-flux-parametron (AQFP) cell library adopting minimalist design and a symmetric layout. In the proposed minimalist design, every logic cell is designed by arraying four types of building block cells: buffer, NOT, constant, and branch cells. Therefore, minimalist design enables us to effectively build and customize an AQFP cell library. The symmetric layout reduces unwanted parasitic magnetic coupling and ensures a large mutual inductance in an output transformer, which enables very long wiring between logic cells. We design and fabricate several logic circuits using the minimal AQFP cell library so as to test logic cells in the library. Moreover, we experimentally investigate the maximum wiring length between logic cells. Finally, we present an experimental demonstration of an 8-bit carry look-ahead adder designed using the minimal AQFP cell library and demonstrate that the proposed cell library is sufficiently robust to realize large-scale digital circuits.
23 July 2007 in IEEE Transactions on Applied Superconductivity
A pipelined 8-bit-serial single-flux-quantum (SFQ) microprocessor, called CORE1beta, was designed and tested. The CORE1beta has two cascaded arithmetic logic units (ALUs) based on forwarding architecture, which can perform two register operations from one instruction. Pipelining is also extensively adopted to enhance the performance. A new design method, known as one-hot encoding, has been introduced into the design of the control circuit. The 4-stage-pipelined SFQ microprocessors, CORE1beta8, have been implemented using the CONNECT cell library and the SRL 2.5 kA/cm 2 Nb process. The frequency for the instruction fetch is 25 GHz, and 20 GHz for the bit-serial data operation. The peak performance and the power consumption of the CORE1beta8 are estimated to be 1400 MOPS (million instructions per second) and 3.4 mW, respectively. We have experimentally demonstrated 4-stage pipelining and all functionalities of the CORE1beta8 microprocessors by on-chip high-speed tests.
1 January 2010 in IEICE Transactions on Electronics