28 July 2014 in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
Energy harvesting is an important enabling technology necessary to unleash the next shift in mm-scale and μW power computing devices, especially for wireless sensor nodes. Energy harvesting could play an important role in biomedical devices where it extends the lifetime of the system. Furthermore, it eliminates the need for periodic maintenance such as exchanging or recharging the battery. This paper presents experimental results of thermal and vibration energy harvested from human body using the thermoelectric generator and the piezo electric harvester, respectively. Contemporary research revealed that most of the published data, including harvesters datasheets, are adjusted for industrial or laboratory-setting environment. This paper focuses on obtaining experimental data from the human body using off-the-shelf harvesters, and discrete electrical components. Our experimental results showed that for 9 cm 2 area of thermoelectric generator, up to 20 μW of power can be generated at 22 ° C room temperature. In addition, 0.5 cm 3 piezo electric harvester can generate up to 3.7 μW when running at 7 mi/h. These data correspond to a power density of 2.2 μW/cm 2 and 7.4 μW/cm 3 for thermoelectric generator and piezo electric harvester, respectively. As such, the harvested energy from thermal and vibration of human body could potentially power autonomous wearable and implantable devices.
9 February 2021 in IEEE Transactions on Sustainable Energy
This paper introduces a new framework for optimum design and operation of hybrid renewable energy plants (HREP) augmented with battery energy storage systems (BESS). A new renewable energy management system (REMS) is developed comprising three components: 1) Enhanced joint forecasting of wind and solar outputs based on deep neural networks and also multiplicative weights update; 2) an advanced optimization model for sizing the HREP-BESS components and the policy of BESS operation; and 3) Augmenting the rolling hourly dispatch for HREP-BESS with a novel dynamic ramping limit and a criterion for reduction of deviations from the hour-ahead dispatch schedule. The proposed REMS tool enables maintaining the inter-hourly ramping of the HREP-BESS output within a threshold. In this context, a novel dynamic ramp limit is proposed to minimize the energy curtailment during operation and maximize energy sales to the power grid. The advantage of the proposed REMS tool over the classical RES operation scheme is the mitigation of the volatility of RES by suppressing extreme ramping events with minimum curtailment. In addition, the BESS degradation is analyzed, and a financial analysis is conducted to assess the economic feasibility of the HREP-BESS design and operation over 25 years period.
22 April 2019 in IEEE Transactions on Sustainable Energy
This letter proposes a hybrid Beta-Kernel Density Estimation (KDE) model for solar irradiance probability density estimation. The model combines parametric and nonparametric approaches to avoid KDE boundary bias and obtain a more reliable statistical model of solar irradiance. The performance of the hybrid model is assessed via comparisons with the Beta distribution and two KDE models that employ different bandwidth selection methods. The assessment is carried out using the Kolmogorov-Smirnov goodness-of-fit test, and four measures of error: Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), and Mean Bias Error (MBE). Results confirm the accuracy of the hybrid model for solar irradiance modeling with percentage improvements over the Beta distribution of up to 13.8% (RMSE), 11.7% (MAE), 19.3% (MAPE), and 72.5% (MBE). The K-S test results show that the proposed Beta-KDE hybrid is the only model for which the null hypothesis is not rejected for any of the eight data sets considered in this study.
23 July 2019 in IEEE Transactions on Power Systems
Solar energy is one of the most important and widely utilized renewable energy resource. Despite the many attractive features of solar-based renewables, the wide scale integration of solar generation into electric power systems presents significant challenges to network planners and operators, mainly due to the intermittent nature of solar energy. Most published work in this area is, however, focused on short-term forecasting studies used for unit commitment and energy market decisions with very little attention paid to solar irradiance probability density estimation needed for network planning and design studies. In this paper, a reliable nonparametric model of solar irradiance probability density is proposed based on the application of Local Linear Regression (LLR) in tandem with a root transformation method, introduced here for the first time. The performance of the proposed estimator is assessed via comparisons with the parametric Beta distribution (conventionally employed to model solar irradiance probability density) and two nonparametric Kernel Density Estimation (KDE) models using the Kolmogorov-Smirnov (K-S) goodness-of-fit test, Coefficient of Determination (R $^2$ ), and a number of error metrics. Results confirm the suitability and accuracy of the proposed method for solar irradiance probability density estimation.
20 April 2021 in IEEE Access
Maternal and fetal heartbeat couplings are evident throughout fetal development. Most of the published work, however, did not consider maternal physiological factors such as Heart Rate Variability (HRV), and did not investigate the interrelationships of maternal-fetal coupling parameters. The aims of this study are to investigate whether: 1) maternal-fetal Heart Rate (HR) coupling ( λ-based) parameters are associated with fetal development, and 2) fetal gold standard Gestational Age (GA) can be estimated using maternal-fetal HR coupling and variability of various recording lengths. The study considered Electrocardiogram (ECG) signals from 60 healthy pregnant women with no records of fetal abnormalities. HRV and λ parameters at various Maternal:Fetal coupling ratios were calculated, and stepwise regression was utilized to create generalized linear regression models considering various lengths of recorded signals (1 and 5 min) to produce a robust estimate of fetal age. Cross-validation performances were evaluated by the mean square root of the average of squared errors (mRMSE) between age values estimated by the proposed models and gold standard GA identified by Crown-Rump Length (CRL). Effect of Fetal Behavioral States (FBSes) on proposed models with different recording lengths was considered to examine the highly nonstationary nature of signals. We found that HR coupling strength for a specific ratio is not constant throughout gestation. Results showed that ratios of 2:3 and 2:4 were common between the proposed models. The value of λ[2:3] was found to be positively correlated with GA, while λ[2:4] had a negative correlation. Compared with gold standard GA identified by CRL, the proposed regression model resulted in mRMSE of 2.67 and 3.69 weeks for the recordings of 5 and 1 min, respectively. However, when FBS was considered, both models produced lower estimation errors. Fetal GA can be more reliably estimated by a multivariate model incorporating fetal and maternal HR coupling and HRV parameters using 5 min of ECG signals.
1 September 2016 in Microelectronics Journal