2 November 2022 in Chemosphere
Petroleum refinery effluents (PRE) are wastewaters from industries associated with oil refining. Within Europe, PREs are regulated through local discharge permits and receive substantial treatment before emission. After treatment, PREs can still contain low levels of various pollutants potentially toxic to organisms. Earlier work, including whole-effluent toxicity assessments, has shown that the toxicity of permitted PREs is often limited. However, the extent to which PREs contribute to chemical pollution already present in the receiving environment is unknown. Therefore, our study aimed to assess the contribution of PREs to mixture toxic pressure in the environment, using the multi-substance potentially affected fraction of species (msPAF) as an indicator. Based on measured chemical concentrations, compiled species sensitivity distributions (SSD) and a mechanistic solubility model, msPAF levels were estimated for undiluted effluents at discharge points and diluted effluents downstream in receiving waters. Median msPAF-chronic and msPAF-acute levels of PREs at discharge points were 74% (P50) and 40% (P95), respectively. The calculated msPAF levels were reduced substantially to <5% downstream for most effluents (82%), indicating low to negligible toxicity of PREs in receiving environments beyond the initial mixing zone. Regardless of differences in endpoints and locations, hydrocarbons (mainly total petroleum hydrocarbons) and inorganics (mainly ammonia) explained at least 85% of the mixture toxic pressure. The msPAF levels of PREs were on average 2.5-4.5 orders of magnitude lower than msPAF levels derived from background pollution levels, suggesting that PREs were minor contributors to the toxic pressure in the environment. This study presents a generic methodology for quantifying the potential toxic pressure of PREs in the environment, identifying hotspots where more effective wastewater treatment could be needed. We explicitly discuss the uncertainties for further refinement and development of the method.
23 February 2026 in Environmental Science and Pollution Research
Mixing zones allow limited exceedances of Environmental Quality Standards within defined areas of receiving waters, yet their implementation across Europe remains uneven and increasingly scrutinised. This study evaluates how environmental change, regulatory evolution, and industrial water-use practices may influence the future viability of mixing zones. A cross-European assessment was conducted using (i) regulatory and technical guidance, (ii) a survey of 22 fuel manufacturing facilities in 14 countries, and (iii) CORMIX near-field modelling to test sensitivity to effluent and ambient parameters. Results revealed substantial variability in permitting conditions, discharge limits, and review frequencies. Only four facilities used mixing zones, though several anticipated future reliance as concentration-based criteria tighten. Modelling demonstrated that effluent density, ambient density, flow regimes, and temperature strongly affected mixing zone dimensions and dilution, with climate change and water reuse practices requiring careful considerations. These findings highlight the need for harmonised guidance, incorporation of mass-loading considerations, and climate-resilient assessment methods to ensure the long-term applicability of mixing zones in (industrial) wastewater management.
1 December 2020 in Rio Oil and Gas Expo and Conference