Silver nanoparticles (NPs) were rapidly synthesized by treating silver ions with a Capsicum annuum L. extract. The reaction process was simple and convenient to handle, and was monitored using ultraviolet-visible spectroscopy (UV-vis). The effect of Capsicum annuum L. proteins on the formation of silver NPs was investigated using X-ray photoemission spectroscopy (XPS), electrochemical measurements, Fourier-transform infrared spectroscopy (FTIR) and differential spectrum techniques. The morphology and crystalline phase of the NPs were determined from transmission electron microscopy (TEM), selected area electron diffraction (SAED) and X-ray diffraction (XRD) spectra. The results indicated that the proteins, which have amine groups, played a reducing and controlling role during the formation of silver NPs in the solutions, and that the secondary structure of the proteins changed after reaction with silver ions. The crystalline phase of the NPs changed from polycrystalline to single crystalline and increased in size with increasing reaction time. A recognition–reduction–limited nucleation and growth model was suggested to explain the possible formation mechanism of silver NPs in Capsicum annuum L. extract.
A novel 3D composite hydrogel composed of reduced graphene oxide nanosheets and α-Fe2O3 nanoparticles (rGO/α-Fe2O3) was synthesized via a two-step process in a solution phase technique. The experimental results show the composite has an interconnected 3D porous network with micrometer pores, and the α-Fe2O3 nanoparticles with the size of about 50–100 nm are uniformly dispersed onto the thin graphene nanosheets. The rGO/α-Fe2O3 composite hydrogel exhibits excellent microwave absorbability. Compared to a pristine reduced graphene oxide (rGO) hydrogel, the reported composite hydrogel has both wider and stronger wave absorption achieved in the frequency range of 1–18 GHz. The composite with a coating layer thickness of 5.0 mm exhibits a maximum absorption of −33.5 dB at 7.12 GHz and in particular, the product with a coating layer thickness of only 3.0 mm shows a bandwidth of 6.4 GHz (from a frequency of 10.8–17.2 GHz) corresponding to reflection loss at −10 dB. The excellent microwave absorption properties are ascribed to the improved impedance matching. Our findings pave a way to design and prepare lightweight and high performance electromagnetic wave absorption materials based on 3D graphene and other nanomaterials.
Magnetic Fe3O4@C@Cu2O composites with a bean-like core/shell nanostructure have been successfully synthesized by a self-assembly approach. The synthetic route is feasible, low-cost and green. The size of the as-prepared magnetic composites is about 420 nm and the shells are composed of several nanoparticles in the range of 5∼10 nm. Interestingly, the carbonaceous layer with bound hydrophilic groups inherited from the starting materials acted as both the linker and the stabilizer between Fe3O4 and Cu2O. The Fe3O4@C@Cu2O composites exhibit ferromagnetic behaviour, and good dispersibility in aqueous solution. Importantly, the bean-like core/shell composites show universal and powerful visible-light-photocatalytic activity for the degradation of Rhodamine-B (RhB), methyl orange (MO), and alizarin red (AR) relative to commercial Cu2O and Degussa P-25 powders. These novel magnetic composites may find applications in dye water treatment, degradation of organic pollutants and environmental cleaning etc.