22 July 2010 in Archives of Computational Methods in Engineering
1 March 2008 in Engineering Structures
1 April 2013 in Construction and Building Materials
1 November 2005 in Journal of Structural Engineering
The paper presents the results of experimental research on the structural behavior of dry joint masonry. The most relevant experimental results concern the strength response of stone dry joint masonry walls subjected to in-plane combined compressive and shear loading. Significant features of the structural behavior shown by the walls are discussed and conclusions on their ultimate capacity and observed failure mechanisms are addressed. Complementarily, the application of an existing numerical model, stemming from plasticity and based on a micromodeling strategy, is also presented and discussed with regard to its capacity to simulate the obtained experimental results. The model was calibrated with data collected from complementary tests carried out on specimens and prisms made of the same type of stone. Finally, the usage of a simplified method of analysis based on a continuum of diagonal struts is also addressed.
1 February 2011 in Computer Methods in Applied Mechanics and Engineering
1 October 2005 in Journal of Structural Engineering
The structural assessment of large traditional and historical masonry buildings poses significant challenges due to the need for modeling complex geometries and nonlinear material behavior. Although sophisticated methods have been developed for the nonlinear analysis of such structural systems—mostly based on two- or three-dimensional finite element modeling—they can hardly be used for practical purposes due to very large computational requirements. This paper presents an alternate method, specifically developed for efficiently simulating the service and ultimate responses of structural systems composed of masonry load-bearing walls. Its efficiency stems from the technique adopted to model the wall panels, based on treating them as equivalent frame systems composed of one-dimensional elements. In addition, biaxial constitutive equations are included to account for the relevant aspects of the nonlinear response of the material. In spite of the numerical efficiency of the method, it is able to obtain accura...