Lidar depolarization measurements were performed simultaneously at two wavelengths (532 and ) in an Asian dust event. The observed particle depolarization ratio for was generally larger than that for , and it was found that the mixing of Asian dust and other spherical aerosols must be taken into account. A simple two-component theory considering two types of aerosol (dust and spherical aerosols) was developed and applied to the observed data. The mixing ratio of dust and the backscatter-related Ångström exponents for dust and spherical aerosols was derived. These parameters can be used to infer characteristics of the aerosols and the mixed states.
The South American Environmental Risk Management Network (SAVER-Net) is an instrumentation network, mainly composed by lidars, to provide real-time information for atmospheric hazards and risk management purposes in South America. This lidar network have been developed since 2012 and all its sampling points are expected to be fully implemented by 2017. This paper describes the network’s status and configuration, the data acquisition and processing scheme (protocols and data levels), as well as some aspects of the scientific networking in Latin American Lidar Network (LALINET). Similarly, the paper lays out future plans on the operation and integration to major international collaborative efforts.
Ceilometer instruments are simple backscatter lidar systems and are usually set in airports for detecting the base of clouds. The instrument can also measure aerosol vertical distribution. Since ceilometers barely detect the molecular backscatter signals, retrieval of aerosol optical properties is an issue. This study investigates applicability of ceilometers to retrieval of optical properties. We make an idealized signal profile with the lidar ratio of 50 sr and calculate the retrieval errors caused by 30% errors of lidar ratio. In the forward inversion, useable (small error) optical properties are backscattering coefficients and the retrieval errors are less than 15% if the aerosol optical depth (AOD) is less than 0.2. The initial backscattering coefficients must be determined from other instruments (e.g., multi-wavelength lidar). Whereas in the backward inversion, if the AOD of idealized signals is larger than 1.5, extinction coefficients converge to the true value (within 5% errors), regardless of lidar ratios and initial conditions. Since there is no need for the system constant or molecular backscatter in this method, ceilometers can be an effective tool for retrieving extinction coefficients of dense aerosols in East Asia.
Automated Mie-scattering lidars have been operated since March 2001 at Beijing, Nagasaki and Tsukuba to reveal the time and height distribution of Asian dust and its optical properties. The lidars detect backscattering light from clouds and aerosols at 532nm in both parallel and perpendicular polarization channels. They continuously measure profiles every 15 minutes regardless of weather conditions. At first we eliminated clouds using vertical profiles of intensity, then Asian dust was identified by the depolarization ratio. In Beijing, close to the source region of the dust, Asian dust events occurred 15 times in March April, and May 2001. Each event continued for several days. The aerosol depolarization ratio (ADR) frequently reached up to 40 %. In Nagasaki, located western part of the Japan, Asian dust was confirmed near the surface with a delay of a few days from events in Beijing. However, in Tsukuba, there were few surface dust events and passing dust in the free troposphere was confirmed. The ADR in Tsukuba were lower than those in other two observatories. Internal mixing of mineral dust and anthropogenic aeorols, and changing size distribution may contribute the differences of ADR among observatories. In Beijing, ground sampling of mineral dust was simultaneously carried out. Mass concentration by the sampler at the surface and extinction coefficient near the surface derived from lidar observation were compared to estimate the conversion factor from extinction coefficient to mass concentration. Utilizing this factor we estimated the vertical distribution of the mass of Asian dust in Beijing.
The indirect effect of aerosols in the atmospheric radiation process, which is the effect of aerosols through the formation of clouds, is one of the most uncertain factors in the current climate models for predicting global warming. To study the effect of aerosols on cloud formation quantitatively, a method for measuring cloud particle size is indispensable. A bistatic lidar method was developed for measuring water cloud particle size at the cloud base. The method is based on single scattering Mie theory. A simple measurement system that consists of a single-wavelength laser and dual-polarization bistatic receivers was developed. Experiments were conducted using the 532 nm beam of the Mie scattering lidar on board the research vessel Mirai. An additional bistatic receiver having polarization analyzers was located at a suitable scattering angle. Cloud particle size (mode radius of the assumed size distribution) was derived from the ratio of the polarization components of the scattered light based on the single scattering Mie theory. Particle size of maritime cumulus and stratus near the cloud base was measured. The particle size profiles in the clouds up to a penetration depth of about 50 m were observed with the method. At a larger penetration depth, effect of multiple scattering dominated the return signals.
Multi-field of view multiple-scattering polarization lidar (MFMSPL) has been developed to measure enhanced backscattering and depolarization ratio from optically thick clouds. Collocated cloud radar observations and Monte Carlo simulations supported the system performance such as cloud detectability and values of depolarization ratio. The system is used to evaluate/improve algorithms for space-borne lidar such as CALIOP on CALIPSO and ATLID on EarthCARE.