29 March 2010 in IEEE Transactions on Applied Superconductivity
Tri-axial cable has been rapidly developed recently because of the advantages such as more compact structure, small leakage field, and low heat and AC losses. One the other hand, it causes an inherent imbalanced three-phase currents distribution due to the different radii of concentric layers. In our previous research, it is demonstrated that a proposed tri-axial cable composed of two longitudinal sections with adjusted twist pitches can transmit balanced three-phase currents. However, before the cable can be installed in a real grid, the heat reliability of the cable in steady-state operation and fault condition should be ensured. The heat balance calculation of the tri-axial cable in steady state under the balanced current distribution allows us to estimate thermal parameters of the cable such as inlet and outlet temperatures, pressure drop and operation temperature. When a phase current suddenly changes under fault conditions, the remaining phase currents become large because of mutual inductances between fault and sound phases. Simulation of the typical fault suggests the copper stabilizer amount on the HTS tape for stability and safety. It is found that copper of 2 mm in thickness keeps the cable temperature under 110 K.
23 June 2009 in IEEE Transactions on Applied Superconductivity
High Temperature Superconducting (HTS) cables have been intensively developed because of low loss and compactness, compared with conventional copper cables. A tri-axial cable composed of three concentric phases has been studied, because it has advantages such as reduced amount of HTS tapes and low heat-in-leak, compared with the three single-phase cables. However, there is an inherent imbalance in the three-phase distribution in the tri-axial cable due to differences in radii of the three-phase layers. We proposed a theory to obtain the balanced three-phase distribution for the tri-axial cable by treating two longitudinal cable sections together and adjusting all twist pitches. We derived a generalized formula as functions of winding pitches satisfying the balanced distribution. We designed and fabricated a short HTS tri-axial cable composed of 1 layer/phase to verify the proposed theory. The test results demonstrated that the theory is right for an equivalent impedance circuit model. The theory should be applied to the unbalanced three phase distributions caused by fabrication errors and inherent imbalance of capacitances in the tri-axial cable. We calculate the unbalanced three phase currents and voltages in steady state, and resolve them into symmetrical components to evaluate an imbalance ratio, which is defined as zero-sequence or negative-sequence to positive-sequence component. It is found that the fabrication errors of twist pitch and radius cause the imbalance ratios less than 1%, and the unbalanced capacitances of the cable of 10 km in length cause imbalance ratios of about 1%.
25 September 2010 in Journal of Superconductivity and Novel Magnetism
16 May 2010 in Physica C: Superconductivity and its Applications
25 January 2011 in Electronics and Communications in Japan
High Temperature Superconducting (HTS) cables have been studied because of their low loss and compactness compared with conventional copper cables. Three-phase cables are usually composed of three single-phase coaxial cables. Recently, triaxial cables, composed of three concentric phases, have been intensively developed, because they have advantages such as reduced amount of HTS tape, small leakage fields, and small heat loss in leaks, compared with three single-phase cables. However, there is an inherent imbalance in the three-phase currents in the triaxial cable due to differences in the radii of the three-phase current layers. The imbalance of currents causes additional losses and large leakage field in the cable, and also degrades the electric power quality. Therefore, we propose a new model, a triaxial cable composed of two longitudinal sections with different twist pitches to obtain the solutions of the balanced three-phase currents and the homogeneous current distribution in each phase of the triaxial cable. We derive a general equation satisfying both the balanced three-phase currents and homogeneous current distribution, as functions of the winding pitches, and finally apply it to the simplest cable. We fabricated and tested a 1-m HTS cable in order to verify that the proposed theory can satisfy the balanced distribution. The results demonstrate the validity of the theory. We also investigated the current distributions along a long triaxial cable considering the capacitances between the layers in the triaxial cable. © 2011 Wiley Periodicals, Inc. Electron Comm Jpn, 94(2): 51–58, 2011; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/ecj.10283
1 August 2009 in Cryogenics