1 August 2009 in Solar Energy Materials and Solar Cells
16 April 2022 in Advanced Energy Materials
Light management is essential for metal‐halide perovskite solar cells to achieve record performance. In this review, criteria on materials, processes, and photonic engineering are established to enhance primarily the short circuit current density for high energy yields. These criteria are used to analyze a large panel of solutions envisaged in the literature for single junction cells. In addition, a perspective acquired from rigorous electromagnetic simulations performed on various comparable structures is introduced to clarify the results of the analyses and to pave the way for further performance enhancement in the case of all‐perovskite, two‐terminal tandem cells.
1 August 2008 in Thin Solid Films
1 August 2015 in Energy Procedia
DBDanièle Blanc-Pelissier
+5
International audienceThermal Atomic Layer Deposition was used to deposit Al2O3 layers with thickness ranging from 2 to 100 nm for surface passivation of silicon solar cells. Various characterization techniques were used to evaluate the chemical, physical and optical properties of the layers and interfaces. Minority carrier lifetime around 2 ms was measured for an optimal thickness of 15 nm for as-deposited layers on high resistivity n-type silicon substrate. An annealing step at 400 degrees C increases lifetime up to 5.7ms for the same structure
1 December 2010 in Thin Solid Films
23 January 2012 in Applied Physics Letters
We study the boron-oxygen defect in Si co-doped with gallium and boron with the hole density 10 times higher than the boron concentration. Instead of the linear dependence of the defect density on the hole density observed in boron and phosphorus compensated silicon, we find a proportionality to the boron concentration. This indicates the participation of substitutional, rather than interstitial, boron in the defect complex. The measured defect formation rate constant is proportional to the hole density squared, which gives credit to latent defect models against defect reactions limited by the diffusion and trapping of oxygen dimers by boron atoms.