1 September 2023 in Journal of the Electrochemical Society
Increasing the power density of proton exchange membrane fuel cell (PEMFC) is essential for its commercialization. Cathode catalyst layer (CCL) carbon additive is an effective method that can improve membrane electrode assembly (MEA) performance under high current density. In this work, carbon nanofiber (CNF) is used as CCL additive and its mechanism is studied. The influence of CNF on the CCL structure is studied by scanning electron microscope (SEM), nitrogen adsorption method and contact angle experiment. Meanwhile, the mechanism is examined by using polarization decomposition and impedance analysis combined with the result in characterization experiments. The results show that: (1) the MEA used in this work has the best performance when adding 1 wt%. The voltage rises 74 mV (15.42%) at 2 A cm−2; (2) CNF varies the MEA performance mainly through changing the hydrophobicity of CCL, influencing the mass transport resistance and the concentration polarization. The mass transport resistance decreases 57.18% at 2 A cm−2; (3) activation polarization values have a negative linear correlation with the peak volume values of the primary pores at around 4 nm in diameter. This study provided a detailed understanding of the mechanism of CNF additive in CCL and will be helpful for improving PEMFC performance.
1 March 2025 in Journal of the Electrochemical Society
Industrial by-product hydrogen and reformate hydrogen from ammonia are possible fuels for proton exchange membrane fuel cells (PEMFCs) which may have ammonia impurities that damage the performance. This study investigates the influence of ammonia impurities in anode fuel on the performance of PEMFCs. Comprehensive electrochemical characterizations were employed to analyze the effects of varying ammonia concentrations and relative humidity (RH) levels. The results demonstrate that ammonia impurities significantly increase electrode activation overpotentials and proton transfer resistance in the cathode catalyst layer and membrane, with more pronounced effects under low RH conditions. Ammonia adsorption on platinum catalysts reduces the electrochemical active surface area and impedes the oxygen reduction reaction, leading to increased activation losses. Additionally, ammonia binding with membrane sulfonate groups elevates proton transfer resistance. These findings underscore the critical need to control ammonia impurities in anode fuel to maintain optimal PEMFC performance.
30 August 2025 in Journal of Power Sources