16 December 2019 in Journal of Civil Structural Health Monitoring
1 April 2011 in Computer-Aided Civil and Infrastructure Engineering
21 May 2015 in Applied Optics
Appearance of micrometer size surface cracks is common in structural elements such as welded connections, beams, and gusset plates in bridges. Brillouin scattering-based sensors are capable of making distributed strain measurements. Pre-pump-pulse Brillouin optical time domain analysis (PPP-BOTDA) provides a centimeter-level spatial resolution, which facilitates detection and monitoring of the cracks. In the work described here, in addition to the shift in Brillouin frequency (distributed strains), change in the Brillouin gain spectrum (BGS) width is investigated for the detection and monitoring of surface micro-cracks. A theoretical analysis was undertaken in order to verify the rationality of the proposed method. The theoretical approach involved simulation of strain within a segment of the optical fiber traversing a crack and use of the simulated strain distribution in the opto-mechanical relations in order to numerically obtain the change in the BGS. Simulations revealed that the increase in crack opening displacements is associated with increase in BGS width and decrease in its peak power. Experimental results also indicated that the increases in crack opening displacements are accompanied with increases in BGS widths. However, it will be difficult to use the decrease in BGS power peak as another indicator due to practical difficulties in establishing generalized power amplitude in all the experiments. The study indicated that, in combination with the shift in Brillouin frequency, the increase in BGS width will provide a strong tool for detection and monitoring of surface micro-crack growths.
7 March 2018 in Journal of Civil Structural Health Monitoring
1 July 2001 in Applied Optics
Sensors capable of making distributed measurements allow for monitoring of the entire structure. Optical fiber sensors are especially attractive for this purpose, since they are geometrically versatile and can be readily integrated within various types of structure and material. Development and characteristics of a quasi-distributed intrinsic fiber-optic strain sensor based on white-light interferometry are described. The research presented here describes the development of a new optical fiber sensor system for measurement of structural strains based on double white-light interferometry. Individual segments of single-mode optical fibers forming a common-path interferometer are linked in series, and a scanning white-light interferometer provides for distributed sensing of strain signals from various locations in the structure. The system is configured for automatic compensation of drift due to environmental effects, i.e., temperature and vibration. Strain gauges were employed for comparison and verification of strain signals as measured by the new system. The experimental results demonstrate the linearity of the system and the capability for distributed sensing of strains.
26 May 2020 in Smart Materials and Structures
Brillouin scattering (BS)–based distributed optical fiber sensors (DOFS) provide distributed sensing capabilities by monitoring the strain along entire segments of structures. Large cracks, such as those with large crack opening displacements (COD) can be detected by strain peaks or singularities along the measurement length of distributed sensors. Microcracks do not provide visible pronounced local peaks along the length of measured distributed strains. The peaks corresponding to microcracks are submerged within the measurement noise due to low signal-to-noise ratio (SNR) of BS systems. Deep learning (DL) methods have the potential to automatically extract feature representations from data exhibiting lower SNRs, and improve classification accuracy. Accordingly, a novel DL method is proposed in this study to improve the crack detection sensitivity of the BS-based DOFS. Development of the proposed DL method includes construction of model architecture, design of a training algorithm and the detection process. A 15 m-long wide-flange steel beam with artificial defects is built and employed in this study. A comprehensive experimental program is undertaken in order to train, validate and test the generality of the proposed DL method. Experimental results demonstrate that the DL method is capable of extracting highly discernable microcrack features from the distributed strains, and distinguish the crack-induced local peaks from the noise. Microcracks with CODs as small as 23 microns are accurately detected in the present work.