The objective of the present work is to investigate the interaction between interfaces and cracks in metal/alumina bi-materials. The behaviour is analyzed by the determination of the J integral and the plastic zone at the crack tip using the finite-element methods. Different orientations of the crack according to the bi-materials interface were examined such as cracks parallel and perpendicular to the interface and inclined cracks. The effects of the mechanical properties of the joint materials, the crack length and the metal thickness on the extent of plastic zone and the J integral at the crack tip were also highlighted. The obtained results allow us to deduce mathematical relations giving the variation of the J integral and the plastic zone according to the crack position.
18 March 2025 in Mechanics of Advanced Materials and Structures
Polymers are known to be sensitive to aging; their lifetime can be predicted through experimental tests. The present paper presents an experimental study on the long-term performance of polymethyl methacrylate (PMMA) exposed to solar and UV radiations, drinking water and sea water. The performance of this polymer was analyzed in terms of strain variation, strain at break in tension, and Young's modulus. The results obtained showed that the amount of absorbed water is independent of the nature of the solvent, and only the absorption kinetics may be regulated by the species contained in the medium. This seems to indicate that plastification of polymers is a reversible phenomenon. In addition, it was found that the tensile strength and elastic modulus drop with increasing immersion time. Compared with seawater, the absorption of drinking tap water, after 36 months, leads to a non-linear behavior of the polymethyl methacrylate. Exposition of PMMA to UV radiation and global solar radiation, for the same duration of exposure, resulted in greater performance degradation when the polymer was exposed to UV radiation. In addition, the results obtained after a 19-month exposure period that the UV radiation changes the behavior of this material from viscoelastic to viscoplastic.
29 August 2022 in Journal of Failure Analysis and Prevention