Irina Ionica

Irina Ionica

Auto-generated profile, based on publicly available information

Irina Ionica

IMEP-LaHC, Univ. Grenoble Alpes, CNRS, Grenoble-INP, France

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 October 2021 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
MAM. Alepidis
M. Alepidis
Gerard GhibaudoGerard Ghibaudo
Gerard Ghibaudo
MBM. Bawedin
M. Bawedin
III. Ionica
I. Ionica
This work addresses the origin of the transient body potential variation in silicon on insulator (SOI) with deposited metal contacts, under back-gate bias sweep from accumulation to inversion. The phenomenon arises from the difficulty to inject carriers into the silicon film due to the Schottky contact between the metal and the low p-type doped silicon. The Schottky diode current is controlled by the back-gate voltage, which fixes the potential at the bottom of the low-doped film. When the back-gate voltage drives the silicon film towards inversion, the limited current from the Schottky contact induces a deficit of minority carriers in the film and brings the body potential in an out-of-equilibrium regime. This phenomenon will be reproduced with numerical modelling based on Poisson and continuity equations, including the quasi-Fermi potential. The transient character and its dependence on the Schottky barrier height will be evidenced. A simple and effective combination of the classic Schottky current equation and inversion current calculated from the Lambert function, as in fully depleted (FD)-SOI MOSFETs, confirms the origin of the effect.

28 August 2023 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
BOB. Obeid
B. Obeid
III. Ionica
I. Ionica
GVG. Vitrant
G. Vitrant
DDD. Damianos
D. Damianos
LBL. Bastard
L. Bastard
Second harmonic generation (SHG) is used to characterize the interfaces of centrosymmetric materials typically used in microelectronic/optoelectronic devices. For such applications, the materials are actually multi-layer stacks, and in this case, the SHG can be difficult to interpret and model. This paper presents the theory of the second harmonic light generated from multilayer structures. The focus is on describing the nonlinear boundary conditions at the interfaces between two different materials, taking into account the distinct contributions of bulk and interface regions. Using these conditions, it is possible to calculate the second harmonic signal from any stack of materials. In this paper, we address stacks containing silicon (100) because it is a material with numerous applications. The nonlinear polarization expressions of the surface and bulk of Si(100), according to Sipe et al. [Phys. Rev. B 35, 1129 (1987)], were integrated into nonlinear boundary conditions in order to determine transmitted and reflected second harmonic waves. An analytical validation was performed on the simple case of an air–silicon interface. For multilayered stacks, the model was compared with experimental results obtained on samples corresponding to pragmatic substrates widely used in microelectronic and optoelectronic applications.

4 March 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
BOB. Obeid
B. Obeid
LBL. Bastard
L. Bastard
ABA. Bouchard
A. Bouchard
VAV. Aubriet
V. Aubriet
KJK. Jouannic
K. Jouannic
III. Ionica
I. Ionica
Optical second harmonic generation (SHG) can be employed to characterize the passivation quality of semiconducting material interfaces. The interface electric field (EDC) related to the existing charges at and near the interface, including the fixed oxide charges Qox, gives rise to the electric field induced second harmonic phenomenon. In this paper, we calibrate the SHG response for EDC measurement, using Al2O3/SiO2/Si(100) samples with different Qox. To perform this calibration, SHG and capacitance-voltage measurements (to access the electrical field of the samples) were made. The experimental results match well the simulated calibration curve, proving the potential of the SHG as stand-alone characterization technique for dielectric stacks on Si.

7 July 2022 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
IIIrina Ionica
Irina Ionica
DDDimitrios Damianos
Dimitrios Damianos
BOBaydaa Obeid
Baydaa Obeid
AKAnne Kaminski
Anne Kaminski
DBDanièle Blanc-Pélissier
Danièle Blanc-Pélissier
LBLionel Bastard
Lionel Bastard
Dielectric layers are deposited on semiconductor materials for many applications, either in the active stacks of the devices (e.g. the gate dielectric in a metal-oxide-semiconductor transistor) or as passivation solutions (e.g. in image sensors [1], solar cells [2] etc.). The progress at the material and technology levels must be accompanied by the development of new characterization tools. One of the challenges in terms of characterization is to obtain the information on the electrical quality of the dielectric-on-semiconductor interface during the fabrication flow, non-destructively, just after the corresponding deposition step (if possible) and without needing to fully fabricate a particular test structure. At wafer level, a typical electrical evaluation method is the Corona characterization of semiconductors [3] that provides the interface state density (Dit) and the “total” charge responding in the structure. Its main drawback is the charging of the surface during the measurement. Optical methods (like the photoconductance decay or the photoluminescence) are non-destructive, but they are directly related to material and interface quality through the carrier lifetime [4] and they don’t allow a simple separation between fixed charge in the oxide (Qox) and Dit. However optical-based methods are still a recommended strategy, since they ensure non-destructive measurements. In this context, the second harmonic generation (SHG) is a good option, because it can be sensitive to the “static” electric field induced between layers. In the SHG, the surface of the sample is irradiated with a femtosecond laser and a second harmonic wave is then generated and detected. In general, the SHG contains both bulk and surface contributions, but for centrosymmetric materials (such as silicon, silicon dioxide, alumina, etc.) in the dipolar approximation, the interface signal is dominant and it is related to the symmetry breaking due to both the interface itself and to the “static” electric field [5]. The SHG has already been used for dielectric characterization using various modalities: SHG versus power, time, wavelength, etc. [6], [7], [8]. In this paper, we focus on the analysis of the interface electric field, which is related to Qox and Dit. If trapping/detrapping phenomena occur during the illumination of the sample, this field can actually depend on time. The value of the SHG (proportional to the square of the field) will then be related to Qox and its evolution in time should correlate to Dit. The technique is promising but it triggers two questions: (1) how to separate optical phenomena (absorption, interferences) specific to multi-layer structures and access electrical field only and (2) how to actually extract Qox and Dit. During the presentation we explain recent results in these two areas, using simulation results obtained with our “home-made” code and a wide panel of samples for the experiments. Alternative electrical characterization performed through capacitance versus voltage measurements gives hints for future calibration. Acknowledgements This work was supported by Region Rhône Alpes (ARC6 program), the French National Research Agency within the framework of the OXYGENE project (ANR-17-CE05-0034) and French National Plan Nano2022, within the IPCEI Nanoelectronics for Europe program. [1] J. L. Regolini, D. Benoit, and P. Morin, "Passivation issues in active pixel CMOS image sensors," Microelectronics Reliability, vol. 47, pp. 739-742, 2007. [2] A. G. Aberle, "Surface passivation of crystalline silicon solar cells: a review," Progress in Photovoltaics: Research and Applications, vol. 8, pp. 473-487, 2000. [3] M. Wilson, J. Lagowski, L. Jastrzebski, et al., "COCOS (corona oxide characterization of semiconductor) non-contact metrology for gate dielectrics," AIP Conference Proceedings, vol. 550, pp. 220-225, 2001. [4] D. K. Schroder, "Carrier lifetimes in silicon," Electron Devices, IEEE Transactions on, vol. 44, pp. 160-170, 1997. [5] J. E. Sipe, D. J. Moss, and H. M. van Driel, "Phenomenological theory of optical second- and third-harmonic generation from cubic centrosymmetric crystals," Physical Review B, vol. 35, pp. 1129-1141, 1987. [6] J. Price, M. Lei, P. S. Lysaght, et al., "Charge trapping defects in Si/SiO2/Hf(1−x)SixO2 film stacks characterized by spectroscopic second-harmonic generation," Journal of Vacuum Science & Technology B, vol. 29, p. 04D101, 2011. [7] N. M. Terlinden, G. Dingemans, V. Vandalon, et al., "Influence of the SiO2 interlayer thickness on the density and polarity of charges in Si/SiO2/Al2O3 stacks as studied by optical second-harmonic generation," Journal of Applied Physics, vol. 115, p. 033708, 2014. [8] H. Park, J. Qi, Y. Xu, et al., "Boron induced charge traps near the interface of Si/SiO2 probed by second harmonic generation," Physica Status Solidi (b), vol. 247, pp. 1997-2001, 2010.

20 May 2022 in ECS Transactions
Verified
Journal Article
Closed access
BOBaydaa Obeid
Baydaa Obeid
LBLionel Bastard
Lionel Bastard
VAValentin Aubriet
Valentin Aubriet
KCKristell Courouble
Kristell Courouble
DDDidier Dutartre
Didier Dutartre
IIIrina Ionica
Irina Ionica
This paper presents the characterization of alumina passivation layers using second harmonic generation (SHG). Based on nonlinear optics, the technique has the advantage of being rapid and non-destructive, especially for thin oxide layers. For the materials under study, the SHG is sensitive to the electronic and structural properties of the interface, particularly to the interfacial electric field (Edc), and thus allowing to characterize fixed oxide charges (Qox) in the oxide and interface traps density (Dit). Time-dependent SHG (TD-SHG) is firstly used here to probe samples with various Dit and a total oxide charges (Qtot), previously extracted using corona oxide characterization of semiconductor (COCOS). The measurement conditions are adjusted to focus on the impact of the fixed charges on the SHG signal. A more detailed analysis of the SHG versus input polarization is conducted in both experiments and simulations and it shows coherent evolution tendencies with the oxide charge.

7 July 2022 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
BOBaydaa Obeid
Baydaa Obeid
LBLionel Bastard
Lionel Bastard
VAValentin Aubriet
Valentin Aubriet
KCKristell Courouble
Kristell Courouble
DDDidier Dutartre
Didier Dutartre
IIIrina Ionica
Irina Ionica
In applications such as image sensors or solar cells, the performance of the device can be improved thanks to the passivation of the silicon substrate using high-k dielectrics such as alumina, hafnium dioxide etc. To assess the quality of the dielectric/semiconductor interface, conventional electrical characterization techniques can be employed, but they require fabrication of dedicated test devices. Among the methods that can be directly used at wafer-level, COCOS [1] allows obtaining electrical information such as the interface states density, but the charging of the sample surface can be an issue. In this paper, we discuss an alternative sensitive and non-destructive optical technique to characterize the electrical properties of a passivation scheme: the second harmonic generation (SHG). In centrosymmetric materials, in the dipolar approximation, the bulk SHG response is zero [2], so the signal mainly contains interface-related information. In particular, when a static electric field (Edc) is present at the interface, the SHG is reinforced and a phenomenon called EFISH (electric field SHG) appears [3]. The electric field at the interface between a dielectric and a semiconductor is related to fixed charges (Qox) and/or interface states (Dit), so the SHG signal can provide these two parameters. Additionally the technique has a potential to probe small areas (within the micrometer size). In this work, the study is focused on the ability of the SHG to measure Qox. The samples used have a layer of Al2O3 of 13nm thickness on Si (100), deposited with different processes, followed or not by an annealing. The annealing step is known to activate negative charges in alumina layers, which promotes the field effect passivation and it can also modify the interface defects [4]. The samples were measured with the SHG tool from FemtoMetrix [5]. Complementary electrical characterizations were performed with the COCOS technique on the full wafer and with capacitance versus voltage (C-V) on dedicated MOS capacitors, in order to obtain Qox. The electric field at the interface can then be calculated through Gauss’ law. Figure 1a shows a typical experimental response of the SHG versus time, obtained on two different samples. The parameters Qtot and Dit were extracted through COCOS. The time-dependence of the SHG is due to the time-dependence of the electric field during the measurement because of charging/discharging effects by carriers generated under the incident laser of the SHG. The SHG signature is obviously stronger for a high Qtot, which indeed is associated with a higher electric field at the interface. Figure 1b shows (with symbols) the experimental results of SHG versus the incidence angle (AOI) for the two samples. The increase of SHG signal for the sample with higher Qtot is confirmed, regardless of the angle of incidence. A general calibration, only based on these types of measurements is not sufficient, since optical phenomena such as transmission & interferences depend on the thickness of the layers involved. In order to better anticipate the effect of these phenomena for a future calibration, we developed a home-made simulator, based on absorption in each layer, boundary conditions at each interface and which contains the “static” interface electric field between materials. Using the electric field calculated with the charge parameters extracted from the COCOS/C-V measurements, we traced the simulated SHG versus AOI (Figure 1b, lines). The tendency observed in experiments is reproduced, even though the simulations are not fully superimposed. This mismatch is probably due to the fact that some of the material parameters in the simulations (e.g. the non-linear susceptibility values) are not very well known. The full paper will show additional samples, corresponding C-V and SHG experimental and simulated data, with the aim of proposing a calibration method that would allow the direct extraction of Qox based only on the SHG measurement. Acknowledgements This work was supported by the French National Plan Nano2022, within the IPCEI Nanoelectronics for Europe program. [1] M. Wilson, J. Lagowski, L. Jastrzebski, A. Savtchouk, and V. Faifer, AIP Conference Proceedings, 2001, vol. 550, no. 1, pp. 220–225. [2] R. W. Boyd, Nonlinear optics. Academic press, 2020. [3] N. M. Terlinden, G. Dingemans, V. Vandalon, R. Bosch, and W. M. M. Kessels, J. Appl. Phys., vol. 115, no. 3, p. 033708, 2014. [4] D. K. Schroder. John Wiley & Sons, 2015. [5] http://femtometrix.com Figure 1