31 May 2021 in IEEE Transactions on Power Electronics
A traditional linear extended state observer (LESO) does not have enough capacity to handle the rapidly-varying back electromotive force (EMF). This key weakness limits the application of LESO in the internal permanent magnet synchronous motor (IPMSM) sensorless control system. In this article, an IPMSM sensorless drive method using an improved LESO (ILESO) is proposed. The ILESO consists of a pure integral and rapidly-varying sinusoidal interference estimator. The rapidly-varying sinusoidal interference estimator is added to the unknown interference estimation loop to estimate rapidly-varying back EMF. And the frequency of the rapidly-varying sinusoidal interference estimator changes adaptively with the operating frequency of the motor to guarantee the desired estimation accuracy of back EMF in a wide-speed range. This design makes it possible to observe the back EMF in a relatively low bandwidth, thereby solving the tradeoff between LESO bandwidth and high-frequency noise filtering. Then, an enhanced phase-locked loop is presented to improve the ability of tracking the rapidly-changing speed. The effectiveness of the proposed method is verified at a 2.0-kW IPMSM sensorless drive.
11 January 2022 in IEEE Transactions on Industrial Electronics
To optimize the current-control performance of the linear permanent magnet synchronous motor (LPMSM) drive system, a robust continuous time model-based predictive control for the LPMSM drive systems is proposed in this article. Since the current regulation technology is fundamental for obtaining the precise thrust of the LPMSM, a continuous time model-based predictive control is utilized in the current loop to achieve a fast dynamic response and accurate tracking accuracy. However, the predictive control is a model-based scheme, thus, the model uncertainties and parameter variations will influence the accuracy of stator current. To solve this problem, an augmented internal model disturbance observer is proposed to estimate the lumped disturbances and then compensate to the forward channel. First, the internal model equation of the current loop is constructed by the internal model control principle. Then, a new augmented matrix is constructed by introducing the error variables of the actual current and the internal model current. The observer control law is designed by the state feedback theory, and the observer parameters are optimized by pole assignment method. Finally, the experimental results demonstrate the correctness and effectiveness of the proposed method.
31 December 2020 in IEEE Transactions on Power Electronics
Internal model control (IMC) has been used widely for its less computational burden, and simple implementation. But the time-varying disturbance cannot be eliminated effectively by IMC, while the disturbance caused by model mismatch, parameter variations and other unstructured dynamic uncertainties in the induction motor (IM). To optimize the current-control performance of induction motor drives, a nonlinear current-control algorithm for the IM systems using internal model control strategy based on a Luenberger disturbance observer (IMC-LDO) is proposed in this paper. The time-varying disturbance has been considered in the IM system. Based on this system, the proposed method is derived, where a Luenberger disturbance observer is introduced to estimate the disturbance. To tune the proposed scheme properly, a stability analysis based on Jury criterion has been used to determine the selection of the observer gain. Comparative experimental results indicate that the proposed method improves the dynamic property and the robustness in case of parameter variations and step load change. The feasibility and effectiveness of the proposed method are verified by the experimental results.
28 July 2022 in IEEE Transactions on Power Electronics
A novel position estimation strategy based on lag compensation-assisted adaptive quasi-fading Kalman filter (LC-AQFKF) is proposed for synchronous reluctance motor (SynRM) sensorless drive in this article. In LC-QFKF, the quasi-fading factor is derived to avoid the harsh assumptions of conventional adaptive fading Kalman filter, and accessibility of the method is improved while ensuring the estimation accuracy. The computational efficiency of LC-AQFKF is promoted by introducing the quasi-fading factor into the prediction error covariance matrix. Moreover, the frequency characteristic of AQFKF-based active back electromotive force observer is analyzed, and the phase lag problem in high-speed situations caused by the low-pass filtering property of AQFKF is overcome. In this way, the estimation accuracy of the rotor position is significantly enhanced. Besides, the double dynamic position compensation method is put forward to strengthen the position estimation performance of sensorless SynRM drive under dynamic conditions. The effectiveness of the proposed scheme is validated at a 1.5 kW SynRM drive.
1 March 2022 in IEEE Transactions on Power Electronics
To achieve high-performance control of the precise linear permanent-magnet synchronous motor (LPMSM) control system, a composite robust current regulation method with good dynamic response and disturbance rejection performance is proposed. First, a continuous time model predictive current control is utilized to obtain superior current response. Since the predictive current control has a strong dependence on the precise mathematical model of the controlled plant, there will be static current error and even system instability when model mismatch and parameter variation. Then, aiming at this problem, the adaptive disturbance observer is applied to compensate the lumped disturbance. However, the adaptive disturbance observer designed based on the single model adaptive law has some disadvantages, such as low precision, long regulation time, poor transient response, and so on. Consequently, a multiple-models adaptive disturbance observer is proposed, which improves the convergence speed of disturbance estimation and system's robustness against parameter perturbation and model mismatch. Finally, a 0.9-kW LPMSM is used as a case study, and the experimental results show the effectiveness of the proposed solution, both during the transient and steady-state operating conditions.
18 October 2022 in IEEE Transactions on Industrial Electronics
When estimating the active back electromotive force (AEMF) of synchronous reluctance motor (SynRM) at medium and high speed, the traditional Kalman Filter (KF) will produce large phase delay due to the low-pass filter characteristics. A novel speed sensorless control scheme of SynRM based on resonant Kalman filter (RKF) is proposed in this paper. Firstly, the AEMF observer based on KF is designed and the bandwidth performance is analyzed. To solve the phase delay problem caused by KF, a generalized integral resonance perturbation estimator (GIRPE) is introduced to the framework of KF and the proposed RKF is formed. The estimation error of AEMF is compensated through GIRPE in the current error feedback loop of KF observer. In this way, the high-precision position estimation at high speed range is obtained. Finally, an improved dynamic position compensator (IDPC) is proposed to enhance the position estimation performance under dynamic case. The effectiveness of proposed scheme is validated at a 1.5kW SynRM drive, and the computational burden of the proposed method is assessed quantitatively.