1 July 2025 in Materials Research Express
To investigate the fracture performance of high-strength concrete (HSC) under different steam curing systems, this research conducted three-point bending tests on HSC and monitored the fracture process using acoustic emission (AE) and digital image correlation (DIC) technology. The experimental results indicate that both the delay period before steam curing and the duration of high-temperature steam curing have a significant impact on the strength and fracture performance of HSC. When the steam curing duration increased from 6 h to 12 h, the strength and fracture performance of the concrete initially improved and then declined. When the delay period was reduced from 4 h to 2 h, the strength and fracture performance exhibited a decreasing trend. The ratio of splitting tensile strength to compressive strength of HSC ranges from 1/10 to 1/12. The strain cloud map obtained through DIC technology revealed the development of cracks, and the variation in the length of the fracture process zone (FPZ) with the loading process was calculated. The activity of the HSC fracture process was reflected by the AE ringing count, and the damage evolution law of the fracture process was evaluated using the b-value. Shortened delay periods or excessive steam curing increased internal defects in HSC, leading to fracture via low-energy microcrack propagation. Properly cured HSC, with a denser microstructure, exhibited higher-energy failure along dominant fracture paths.
20 January 2026 in Materials Research Express
PHC pipe pile concrete is characterized by high strength but pronounced brittleness, which makes it susceptible to cracking during the pile-driving process. To elucidate the effect of centrifugal forming and steam curing on the fracture properties of PHC pipe pile concrete, this study prepared centrifuged prismatic specimens using a self-designed centrifuge and carried out three-point bending fracture experiments combined with digital image correlation (DIC) and acoustic emission (AE) techniques. The results show that reducing the delay period to 2 h from 4 h, or extending the duration beyond 12 h at 80 °C, induces significant steam-related damage in concrete. This leads to a decrease in flexural strength and crack initiation toughness, as well as increased branching and irregularity in crack propagation paths. The AE ringing counts and energy decrease, showing a uniform distribution throughout the fracture process. In contrast, under proper steam curing conditions, the post-peak descending stage exhibits an explosive increase in both ringing counts and energy. Centrifugal forming compacts the concrete mixture, lowers the water-cement ratio, enhances initial strength, and mitigates the negative effects of steam curing. This provides a theoretical basis for reducing the delay period by approximately 2 h compared to conventional concrete, thereby improving production efficiency in the PHC pipe pile manufacturing process.