7 September 2022 in Royal Society Open Science
It has been a challenge to synthesize macrolide musk in excellent yields with high purity. KF-La/γ-Al 2 O 3 catalyst was prepared from a highly basic mesoporous framework using a mild method. The prepared KF-La/γ-Al 2 O 3 catalyst was employed for the synthesis of cyclopentadecanolide from methyl 15-hydroxypentadecanoate. The morphology and structure of prepared catalysts were characterized using XRD, TG-DTG, SEM, EDX, TEM, BET and CO 2 -TPD. The results revealed that the K 3 AlF 6 and LaOF are produced on the surface of KF-La/γ-Al 2 O 3 , and LaO can promote the dispersion of KF on the surface of Al 2 O 3 . Catalysts pore size main distribution ranges between 10 and 30 nm, the maximum CO 2 desorption temperature is 715°C when the La loading is 25%. Because F − ion has a higher electronegativity than O 2− ion, the KF-promoted metal oxide (Al 2 O 3 or/and La 2 O 3 ) contained more strong basic sites, compared with that of the corresponding metal oxide. The yield of cyclopentadecanolide obtained at 0.5 g KF-25La/γ-Al 2 O 3 catalyst and a reaction temperature of 190°C for 7 h were 58.50%, and the content after reactive distillation is 98.8%. The KF-La/γ-Al 2 O 3 catalyst has a larger pore size and basic strength, which is more conducive to the macrolactonization of long-chain hydroxy ester.
27 October 2023 in Case Studies in Thermal Engineering
Although pinane has a wide range of uses, there are no reports on the safety of pinane oxidation. The thermal oxidation properties of pinane were investigated through MCPVT. The primary oxidation products of pinane were separated and structurally characterised, and its decomposition properties were assessed by MCPVT and DSC. The results showed that pinane had an initial oxygen uptake temperature of 123.5 degrees C and exploded when the temperature rose to 132.7 degrees C. Pinane autoxidised at 110 degrees C for 9 h formed a high level of peroxide (81.18 mmol/kg) with an activation energy of 138.77 kJ/mol. The oxidation of pinane occurs mainly at the tertiary carbon atom attached to the methyl group, and the main peroxide produced is pinane hydroperoxide (PHP). PHP has an exothermic onset temperature (Tonset), a heat of decomposition (QDSC) and an activation energy of decomposition of 114.6 degrees C, 1878.0 J/g and 109.4 kJ/mol respectively, which should classify it as a hazardous substance. PHP has a lower activation energy than pinane and is the determining factor for the safety of the pinane oxidation reaction. The products of thermal runaway of pinane are relatively complex and consist mainly of 1-(2, 2-dimethyl-3-ethylcyclobutyl) ethanone, nopinone, 2, 3-pinanediol and pinonic acid.
13 December 2024 in Energy