18 June 2024 in IEEE Transactions on Electromagnetic Compatibility
An electromagnetic (EM)-circuit cosimulation approach is presented for evaluating the vulnerability of integrated circuits (ICs) when exposed to external EM waves. The approach comprises frequency-domain simulations of an EM subsystem, time-domain simulations of a circuit subsystem, and an interface scheme that integrates the two subsystems. To address the multiscale geometric complexities in intricate circuit designs, a nonconformal domain decomposition method is employed for efficient mesh generation and numerical computations. For capturing the EM subsystem's behavior over a wide-frequency band, an adaptive interpolation scheme, built upon Loewner matrix technique, is developed for fast frequency sweep. The simulated and interpolated behavior of the EM subsystem is integrated with IC models and subsequently processed with time-domain analyzes. To demonstrate the effectiveness of the method and assess the EM vulnerability of a practical IC design, numerical simulations and laboratory experiments are conducted utilizing near-field antenna and far-field wave sources.
1 January 2021 in Journal of Applied Optics
According to the development demand of miniaturization and lightweight for airborne photoelectric weapons, an infrared and laser system was designed with the common optical path. The infrared waveband of the system was 3 μm~5 μm, and the F number was 2. The surface array detector with a medium wave of 640×512 pixels was adopted, and the pixel size was 15 μm×15 μm. The laser emission and infrared optical path used the common telescopic system. By using cubic prism, the scanning in the range of azimuth 360° and pitch 0°~90° was realized by optical system. The common optical path design could reduce the size of the mirror and lens in the optical path, which had the characteristics of compact structure and small mass. It was focused on the problem of introducing the laser back scattering by the optical elements in common optical path. The joint optimization method of CODE V and LightTools was adopted to avoid its influence, which could ensure the good imaging performance of optical system.