8 July 2022 in IEEE Transactions on Biomedical Circuits and Systems
This paper presents a neuromorphic processing system with a spike-driven spiking neural network (SNN) processor design for always-on wearable electrocardiogram (ECG) classification. In the proposed system, the ECG signal is captured by level crossing (LC) sampling, achieving native temporal coding with single-bit data representation, which is directly fed into an SNN in an event-driven manner. A hardware-aware spatio-temporal backpropagation (STBP) is suggested as the training scheme to adapt to the LC-based data representation and to generate lightweight SNN models. Such a training scheme diminishes the firing rate of the network with little plenty of classification accuracy loss, thus reducing the switching activity of the circuits for low-power operation. A specialized SNN processor is designed with the spike-driven processing flow and hierarchical memory access scheme. Validated with field programmable gate arrays (FPGA) and evaluated in 40 nm CMOS technology for application-specific integrated circuit (ASIC) design, the SNN processor can achieve 98.22% classification accuracy on the MIT-BIH database for 5-category classification, with an energy efficiency of 0.75 $\mu$ J/classification.
1 March 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Large-scale neuromorphic computing requires the multi-chip network to provide high computing power. Efficient routing schemes and on-chip router design are necessary for handling various inter-chip transmission patterns. In this paper, we propose a hybrid-mode on-chip router that supports both multicast and unicast routing for the large-scale neuromorphic simulation. Two routing schemes, namely Cache-like Spike Weight Indexing and General Unicast Flow Control, are proposed to accommodate the chip-to-chip transmission of spike and non-spike data. This work is evaluated on a neuromorphic platform built with an $8\times 8$ FPGA chips array. Running a simulation of 1M neurons at 200MHz, the proposed router achieves a processing latency of 25ns and a chip-to-chip latency of 287ns. Working in the unicast mode, the router can synchronize status flags of all chips within $5 ~\mu \text{s}$ . Moreover, it reduces the peak spike traffic by 25.65% with the help of Load-aware Multicast Routing, compared with other multicast routing strategies.
20 June 2022 in IEEE Transactions on Industrial Informatics
Ultra-low latency parsing of financial data is gaining significance in the high-frequency trading of the security exchange market. Hardware-aided systems exhibit superior improvement of latency over traditional software solutions, but flexibility may suffer when processing the financial protocol. This paper presents a domain-specific accelerator for the market data distribution system, which integrates a FAST decoder, a 10 G network interface, and a high-speed PCIe host interface into a single FPGA Acceleration Card. The proposed FAST decoder adopts the FSM-coordinated Sequence Mapping Table to achieve run-time reconfigurability over fine-grained FPGA programming, and 16 fields can be decoded simultaneously in a pipelined manner, resulting in a decoding latency of only 33 ns. Evaluated on the Xilinx Alveo U200 acceleration card, this work improves the latency of decoding a FAST message by 26% $\sim$ 72% than state-of-the-art FPGA designs, and outperforms the software baseline by $>27\times$ in terms of latency covering both decoding and communication.
13 April 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
Latency of a trading system is crucial for gaining profitability in the financial market. Traditional software-based trading system suffers from high latency in market data parsing, network communication and operating system scheduling. The latency is even worse if algorithm processing is used for market data analysis, especially Deep Neural Networks (DNN) are involved. This brief presents a hardware-based trading system which achieves all key functionalities including network communication, financial protocol parsing and DNN processing in one FPGA card. Running at 300 MHz, the proposed hardware design realizes over $98\times $ acceleration than the software-based system regarding the overall latency.