Electromagnetic vibration is an important excitation source for squirrel-cage induction motors. However, the electromagnetic vibration under various loadings has not been sufficiently analyzed. It is proposed in this paper that the electromagnetic vibration of motors under different loads can be obtained by analyzing the amplitude of the electromagnetic force wave. The Maxwell tensor method is employed to derive the spatial and temporal distributions of the radial force. This paper also calculates the radial force using the finite element method and decodes the calculated results using two dimensional fast Fourier transform (2D-FFT) to determine the amplitude of the electromagnetic force at the spatial order under different loads. In addition, through the modal analysis of the stator core, it can be concluded that in the case of nonresonance, the vibration response increases when the electromagnetic force of the first-order and second-order rotor slot harmonic increases. Finally, the conclusion is verified by separating the electromagnetic vibration of the motor using a vibration test rig.
Bearing failures are the most frequent causes of breakdowns in rotating machinery. Different levels of severity in these failures exhibit distinct fault characteristics in the vibration signal. This paper presents a bearing fault diagnosis method that considers different severity levels, involving the selection of statistics detection index symptom parameter and the application of canonical discriminant analysis (CDA). Initially, kurtosis is employed to detect abnormalities in the bearing. Subsequently, statistical analysis theory is utilized to extract efficient symptom parameters from the time domain and frequency domain vibration signals. As a statistical analysis method, CDA can discriminate between different signals by maximizing the between-group difference and minimizing the inter-group difference. By analyzing the distribution of CDA canonical scores, bearing faults can be intuitively diagnosed. The proposed method is validated using vibration signals obtained from an experimental bench with three different bearing conditions (normal, inner race fault, outer race fault) exhibiting varying severity levels. The results demonstrate the effectiveness and feasibility of diagnosing faults under different severity levels.