1 December 2015 in Resources, Conservation and Recycling
A key challenge for the waste management sector is to maximise resource efficiency whilst simultaneously reducing its greenhouse gas (GHG) emissions. For stakeholders to better understand the GHG impacts of their waste management activities and identify emissions reduction opportunities, they need to be able to quantify the GHG impacts of material recycling. Whilst previous studies have been undertaken to develop GHG emission factors (EF) for materials recycling, they are generally insufficient to support decision-making due to a lack of transparency or comprehensiveness in the range of materials considered. In this study, we present for the first time a comprehensive, scientifically robust, fully transparent, and clearly documented series of GHG EFs for the recycling of a wide range of source-segregated materials. EFs were derived from a series of partial life cycle assessments (LCA) performed as far as possible in accordance with the ISO 14040 standard. With the exceptions of soil, plasterboard, and paint, the recycling of source-segregated materials resulted in net GHG savings. The majority of calculated GHG EFs were within the range of data presented in the literature. The quality of secondary data used was assessed, with the results highlighting the dearth of high quality life cycle inventory (LCI) data on material reprocessing and primary production currently available. Overall, the results highlight the important contribution that effective source-segregated materials recycling can have in reducing the GHG impacts of waste management
1 August 2016 in Journal of Cleaner Production
Material flow analysis (MFA) and life cycle assessment (LCA) have both widely been applied to support solid waste management (SWM) decision making. However, they are often applied independently rather than conjointly. This paper presents an approach that combines the MFA and LCA methodologies to evaluate large and complex SWM systems from an environmental perspective. The approach was applied to evaluate the environmental performance, focusing on greenhouse gas (GHG) emissions, of a local authority SWM system and to compare it with alternative systems to assess the potential effectiveness of different waste policy measures. The MFA results suggest that national recycling targets are unlikely to be met even if the assessed policies are implemented optimally. It is likely that for the targets to be met, investigated policies would need to be combined with additional policies that target reductions in waste arisings. The LCA results found landfilling of residual waste to be the dominant source of GHG burdens for the existing system, whilst material reprocessing was found to result in GHG benefits. Overall, each of the alternative systems investigated were found to result in lower GHG impacts compared to the existing system, with the diversion of food waste from the residual waste stream found to be potentially the most effective strategy to reduce GHG emissions. The results of this study demonstrate that the complementary methodologies of MFA and LCA can be used in combination to provide policy and decision makers with valuable information about the environmental performance of SWM systems
1 February 2019 in Resources, Conservation and Recycling
1 May 2017 in Waste Management
1 October 2017 in Waste Management
An increasing number of geochemically scarce metallic raw materials are entering into our lives via new technologies. A reversal of this trend is not foreseeable, leading to concerns regarding the security of their supply. However, the evaluation of raw material supply is currently hampered by inconsistent use of fundamental terminologies and incomplete assessment criteria. In this paper, we aim to establish a consistent framework for evaluating raw material supply from both anthropogenic and geological sources. A method for concept extraction was applied to evaluate systematically the use of fundamental terms in the evaluation of raw material supply. The results have shown that 'availability' is commonly used in raw material supply evaluations, whilst other researchers suggest that raw material supply should be evaluated based on 'accessibility'. It was revealed that 'accessibility' actually comprises two aspects: 'availability' and 'approachability'. Raw material 'approachability' has not previously been explicitly addressed at a system level. A novel, consistent framework for evaluating raw material supply was therefore developed. To demonstrate the application of the established framework, we evaluated the raw material supply of four rare earth element case studies. Three case studies are End-of-Life products (the anthroposphere) from Switzerland: (i) phosphors in fluorescent lamps, (i) permanent magnets in the drive motors of electric cars and (iii) fibre optic cable. The fourth case study source is the Earth's crust (the geosphere): Mount Weld deposit in Australia. The framework comprises a comprehensive evaluation of six components relating to raw material mining and processing: their geological knowledge, eligibility, technology, economic, societal and environmental impacts. Our results show that metals are not considered to be fully accessible in any of the case studies due to a lack of necessary technologies and potential societal and environmental impacts. The framework presented here can serve as a starting point for the development of an evaluation framework for raw material accessibility at an early project development stage.
1 December 2011 in Carbon Management