23 June 2022 in IEEE Internet of Things Journal
LoRa is one of the most promising techniques for the Internet of Things (IoT), and it has attracted considerable attention. Most existing LoRa applications follow the LoRaWAN specification and adopt a star topology. However, LoRaWAN networks are typically limited by their scalability due to the use of a centralized control strategy. The recent development of LoRa-Mesh networks can be a potential solution to this limitation. In this article, we propose a hierarchical-based energy-efficient (HBEE) routing protocol as a desirable method for building LoRa-Mesh networks. The HBEE exhibits the following advantages: 1) it can quickly build the network structure during the network formation stage by using contention-free concurrent transmission; 2) during the routing exploration phase, end-device nodes (ENs) can locate parent ENs with a minimized overhead; and 3) at the data collection stage, packet collision is minimized using multipath and multichannel routing method. Simulations are conducted to evaluate the performance of HBEE, and the results show that HBEE outperforms conventional ad hoc on-demand distance vector routing (AODV) protocol in terms of energy efficiency and transmission delay. Finally, proof-of-concept experiments are implemented in the real world. The results show that the packet reception rate of 95.7% and 89.8% can be achieved during network formation and normal operation phases, respectively.
24 May 2023 in IEEE Internet of Things Journal
LoRa technology is widely used to build wireless networks in various Internet of Things (IoT) applications. As the increased popularity of IoT, LoRa also gains tremendous attention in recent years. In most of the LoRa networks, Aloha protocol is employed to send packets which may easily lead to collisions. Thanks to the orthogonality of spreading factor (SF) in modulate technique, a potential solution is obtained for this collision issue in LoRa network. In this study, a reinforcement learning (RL) based method called LR-RL is proposed to assign SF properly to alleviate collisions. The idea of LR-RL is mainly derived from the mathematical model of SF-channel traffic equilibrium, which indicates that SF with higher data rate must undertake more packet loads. Based on the system model, several similar methods such as LR-opt-pro, LR-greedy and LR-RL are put forward successively. The LR-RL algorithm owns the best performance in terms of packet collision rate (PCR). In addition, we carry out simulations to evaluate the performance of LR-RL in both one-hop and LoRa-Mesh networks. Results show that LR-RL has lower PCR than other SF allocation methods. Moreover, practical experiments are also conducted to verify the performance. All the experiments exhibit that LR-RL is a desirable method to reduce packet collisions in LoRa network.
19 January 2024 in IEEE Internet of Things Journal
Positioning services are often required in industrial and public applications. The requirements for positioning systems include sufficient positioning accuracy, appropriate anchor deployment in complex scenarios, stability, and precise clock synchronization between anchors. Therefore, algorithms designed for single-room and simple laboratory scenarios are not suitable. To address these challenges, this article proposes a comprehensive solution that combines ultrawideband (UWB) technology, Time Difference of Arrival (TDoA)-based positioning, and a cascaded wireless clock synchronization (CWCS) algorithm. First, we introduce the CWCS algorithm. Second, we discuss the control algorithm for transmitting clock calibration packets (CCP) through wireless broadcast. Finally, we define the Time-of-Arrival selection strategy for TDoA calculation. For multiroom scenarios, we present a positioning boundary optimization method based on received signal strength power and the first path power. This method performs well in real-world experiments.
23 April 2023 in Internet of Things