10 September 2024 in Jurnal Pendidikan Vokasi
The demand for increasingly diverse product designs and specifications in the manufacturing industry requires CNC machine operators to have high technical skills and strong self-efficacy and creativity. High self-efficacy allows operators to be more confident in applying their technical skills, while creativity helps them solve problems and challenges during the production process. This study aims to improve students' self-efficacy and creativity by applying the Peer-Project Based Learning (Peer-PjBL) model, which combines aspects of project-based learning with peer-to-peer learning. The method used in this research is Classroom Action Research (PTK), which consists of two implementation cycles. Each cycle involves planning, implementation, observation, and reflection stages. The subjects of this study were 20 students who took the CNC Machining Technology course at Yogyakarta State University. Data were collected using a questionnaire that measured self-efficacy and student creativity indicators and then analyzed descriptively. The results showed that applying the Peer-PjBL method significantly increased students' self-efficacy and creativity in each research cycle. This improvement can be seen in students' ability to face new challenges independently, as well as their ability to generate diverse creative ideas in solving problems. This research makes an important contribution to the development of learning methods in vocational education by emphasizing the improvement of technical abilities and non-technical skills, such as self-efficacy and creativity, which are needed in the modern world of work.
19 July 2024 in EUREKA: Physics and Engineering
When creating lightweight structures to lower the rail vehicle's overall weight, composite materials with fiber reinforcements are the material of choice. Because of its excellent strength, low weight, high durability, stiffness, damping ability, flexural strength, resistance to wear and tear, impact resistance, indentation resistance, and corrosion resistance, composite materials. This study proposes to analyze the load and contact mechanic on the glass fiber reinforced polymers (GFRP) composite structural under tensile and flexural load. Tensile load 17.490 N was applied in 2 model, with Tab and without Tab. The flexural loading 669 N was applied in 6 models with the 3-load types and 2-contact mechanic types. The stress values and locations of the proposed finite elements analysis (FEA) modeling results were verified through experiments for tensile loads and flexural loads. The FEA modeling of GFRP composites under tensile load with tabs and without tabs have same the maximum stress location. The location at the outer surface of the grip splitter line. The stress 107 MPa on the gauge length area of FEA modeling and the experimental are same. FEA modelling under flexural loads, when using bonded contact shows that the location and value of stress concentration is not same as experimental. Using frictionless contact model have the value and location of maximum stress same as experimental. The FEA model 5 with Face load and frictionless mechanical contact has the stress concentration that is closest to the experimental results. By considering the type of load applied to the surface and the frictionless contact mechanics, FEA modeling can be used to predict the behavior of composite structures under bending loads
16 January 2025 in RESWARA: Jurnal Pengabdian Kepada Masyarakat
Kegiatan pengabdian masyarakat ini berfokus pada pengembangan produk olahan singkong dengan tujuan untuk meningkatkan produktivitas dan kemandirian ekonomi kelompok Ibu-Ibu PKK Dusun Kepuh, Desa Pacarejo, Kabupaten Gunungkidul. Meskipun singkong memiliki potensi besar sebagai komoditas lokal, pemanfaatannya oleh mitra masih belum optimal. Beberapa tantangan utama yang dihadapi antara lain produksi yang masih dilakukan secara manual, mutu produk keripik singkong yang belum konsisten, dan kesulitan dalam memasarkan produk ke pasar yang lebih luas. Program ini mencakup serangkaian pelatihan yang meliputi pengoperasian mesin perajang singkong untuk meningkatkan efisiensi produksi, teknik pengolahan keripik dengan berbagai varian rasa guna meningkatkan kualitas produk, serta teknik pengemasan yang menarik dan fungsional. Selain itu, peserta juga dibekali dengan keterampilan pemasaran digital, mencakup pembuatan akun di platform e-commerce dan pembuatan iklan yang efektif. Hasil kegiatan menunjukkan peningkatan signifikan dalam kapasaitas produksi sebesar 60% dan transaksi pemasaran sebesar 25%. Diharapkan program ini dapat memberdayakan komunitas lokal dan meningkatkan kesejahteraan ekonomi masyarakat secara berkelanjutan. Keberhasilan dan keberlanjutan program memerlukan dukungan berkelanjutan dari berbagai pihak, termasuk pemerintah, institusi pendidikan, dan sektor swasta
29 March 2024 in EUREKA: Physics and Engineering
Uniformity of coating thickness in the electroplating process of cylindrical objects using plate-shaped anodes has become a challenging issue. One electroplating method uses a cylindrical anode. However, this strategy is too expensive and requires a lot of material. This paper determines the effect of brass plate anode formation on the headrest thickness uniformity of the electroplating brass coating on the headrest connector of electric wheelchairs made of St. 37. The research started by making headrest connector using a turning machine, then plating the brass using the electroplating method, and then testing the thickness of the resulting brass for uniformity of data using statistics. The number and placement of the plate anodes varied with 2 symmetrical position anodes, 3 symmetrically spaced anodes, and 4 symmetrically positioned anodes. Coating thickness was measured using a digital microscope with a magnification of 200 times. Before measuring the thickness of the coating, the surface of the joint is milled first to remove any chamfer on the top surface of the body and the cover headrest connector. The surface is smoothed using sandpaper and cleaned using etching. Data from the uniformity test results show the highest level of uniformity in the variation of 4 anodes on the body and the cover of the headrest connector, followed by variations on the 3 anodes on the body and the cover of the headrest connector, and variations of 2 anodes on the body and the cover of the headrest connector. The greater the number of anodes and their placement around the cathode, the higher the thickness uniformity of the resulting brass electroplating layer. The formation of brass plate anode on electroplating affects headrest thickness uniformity
29 September 2025 in EUREKA: Physics and Engineering
Charcoal from biostove pyrolysis has the potential to be further processed as a filler for epoxy composite materials. However, there is not much use of charcoal as a filler for epoxy composite materials. The characteristics of charcoal material from biostove pyrolysis as an epoxy filler are not yet known. The aim of this research is to test the material resistance and damage formation of charcoal-filled epoxy composite materials using quasi static tests. Composite materials are printed using the hand layup method. The composite sample placed between the support plate and cover plate and then locked with bolts on all sides. The indenter is in the middle of pressing the material at low speed until the composite sample is penetrated by the indenter. Tests were carried out to determine the SEA (specific energy absorption) value and the form of damage experimentally. The total energy value absorbed in the material first. This total energy is obtained by calculating the area under the force-displacement curve for each sample that has been tested. Damage formation of composite materials is known from the results of quasi static tests. The load is applied to the composite material until material damage occurs. This damage is indicated by the penetration of the indenter. The results of the research stated that from the quasi-static test it was found that the higher the percentage of charcoal volume fraction resulted in the greater the SEA value of the material from V10%, V15%, V20%, and V25% with an average increase of 16%. Damage formation in composite materials tends to be radial cracks. The interesting thing about this research is that the higher the volume fraction percentage of charcoal, the more ductile it is. This can be seen from the shape of the hole used by the indenter which is not broken