Chemical and electrical thrusters are generally utilized to control the attitude and orbit of spacecraft in aerospace. When they are firing, the exhaust expands into the vacuum environment, known as the vacuum plume. The plume flow can collide with spacecraft surfaces due to sufficient expansion, exerting adverse effects on the spacecraft, such as heating load, force/torque, contamination, and sputtering. Therefore, it is vital to investigate the vacuum plume to ensure the function and safety of the spacecraft. This review introduces the ground test and numerical simulation methods of the vacuum plume for chemical and electrical thrusters. The vacuum environment, invasive, and non-invasive (optical) measurements of the ground test are concluded. Numerical simulation of plume flow and its effects is exampled. The hybrid CFD-DSMC (computational fluid dynamics and direct simulation Monte Carlo) algorithm is employed to simulate the gas plume flow spanning continuum and transitional and free molecular flow regimes for chemical thrusters. By contrast, the PIC-DSMC (particle-in-cell plus direct simulation Monte Carlo) algorithm is used for the plasma plume flow containing charged particles exhausted by electrical thrusters. Moreover, the topics of fast prediction of the vacuum plume, plume–surface interaction, and plume–Lunar/Mars regolith interaction are proposed for future research.
Active disturbance rejection control (ADRC) is a model-independent method widely used in passive fault-tolerant control of the quadrotor unmanned aerial vehicle. While ADRC’s effectiveness in actuator fault treatment has been proven, its tolerance to sensor faults requires improvements. In this paper, an ADRC-based active fault-tolerant control (AFTC) scheme is proposed to control the flying attitude against sensor fault for reliability enhancement. Specifically, a semi-model-dependent state tracker is raised to reduce the influence of slow tracking, and accentuate the sensor fault even in varying maneuvers. Derived from the random forest, an enhanced method named auto sequential random forest is designed and applied to isolate and identify faults in real time. Once the tolerance compensation is generated with the fault information, a high-performance AFTC is achieved. The simulation results show that the proposed method can effectively follow the residual when a sensor fault and a change of maneuver occur concurrently. Precise fault information is obtained within 0.04 s, even for small faults on the noise level. The diagnosis accuracy is greater than 86.05% (100% when small faults are excluded), and the identification precision exceeds 97.25%. The short settling time (0.176 s when the small fault is excluded) and modest steady-state error validate the advanced and robust tolerance performance of the proposed AFTC method.
5 September 2022 in Aerospace Science and Technology