29 January 2025 in Journal of The Royal Society Interface
Culturing living cells in three-dimensional environments increases the biological relevance of laboratory experiments, but requires solutes to overcome a diffusion barrier to reach the centre of cellular constructs. We present a theoretical and numerical investigation that brings a mechanistic understanding of how microfluidic culture conditions, including chamber size, inlet fluid velocity and spatial confinement, affect solute distribution within three-dimensional cellular constructs. Contact with the chamber substrate reduces the maximally achievable construct radius by 15%. In practice, finite diffusion and convection kinetics in the microfluidic chamber further lower that limit. The benefits of external convection are greater if transport rates across diffusion-dominated areas are high. Those are omnipresent and include the diffusive boundary layer growing from the fluid–construct interface and regions near corners where fluid is recirculating. Such regions multiply the required convection to achieve a given solute penetration by up to 100, so chip designs ought to minimize them. Our results define conditions where complete solute transport into an avascular three-dimensional cell construct is achievable and applies to real chambers without needing to simulate their exact geometries.
1 February 2022 in AIP Advances
Physiologic chemoattractant gradients are shaped by diffusion, advection, binding to an extracellular matrix, and removal by cells. Previous in vitro tools for studying these gradients and the cellular migratory response have required cells to be constrained to a 2D substrate or embedded in a gel devoid of fluid flow. Cell migration in fluid flow has been quantified in the absence of chemoattractant gradients and shown to be responsive to them, but there is a need for tools to investigate the synergistic, or antagonistic, effects of gradients and flow. We present a microfluidic chip in which we generated precisely controlled gradients of the chemokine CCL19 under advective-diffusive conditions. Using torque-actuated membranes situated between a gel region and the chip outlet, the resistance of fluid channels adjacent to the gel region could be modified, creating a controllable pressure difference across the gel at a resolution inferior to 10 Pa. Constant supply and removal of chemokine on either side of the chip facilitated the formation of stable gradients at Péclet numbers between −10 and +10 in a collagen type I hydrogel. The resulting interstitial flow was steady within 0.05 μm s−1 for at least 8 h and varied by less than 0.05 μm s−1 along the gel region. This method advances the physiologic relevance of the study of the formation and maintenance of molecular gradients and cell migration, which will improve the understanding of in vivo observations.
21 August 2024 in bioRxiv
Culturing living cells in three-dimensional (3D) environments increases the biological relevance of laboratory experiments, but has the caveat of requiring solutes to overcome a diffusion barrier to reach the center of cellular constructs. We present a theoretical and numerical investigation that brings a mechanistic understanding of how microfluidicculture conditions, including chamber size, inlet fluid velocity, and spatial confinement, affect solute distribution within 3D cellular constructs. Contact with the culture chamber reduces the maximally achievable construct radius by 15%. In practice, finite diffusion and convection kinetics in the microfluidic chamber further lower that limit. The benefits of external convection are greater if transport rates across diffusion-dominated areas are high. Those are omnipresent and include the diffusive boundary layer growing from the fluid-construct interface and regions near corners where fluid is recirculating. Less convection is required to approach an ideal maximally-supplied state when diffusion within the constructs is slow. Our results contribute to defining the conditions where complete solute transport into an avascular 3D cell construct is achievable and demonstrate how flow velocity must evolve with construct radius in order to maintain a given solute penetration depth.