8 April 2011 in Materials and Manufacturing Processes
The residual stresses induced during shaping and machining play an important role in determining the integrity and durability of metal components. An important issue of producing safety critical components is to find the machining parameters that create compressive surface stresses or to minimize tensile surface stresses. In this article, a systematic data-driven fuzzy modeling methodology is proposed, which allows constructing transparent fuzzy models considering both accuracy and interpretability attributes of fuzzy systems. The new method employs a hierarchical optimization structure to improve the modeling efficiency, where two learning mechanisms cooperate together: the Nondominated Sorting Genetic Algorithm II (NSGA-II) is used to improve the model's structure, while the gradient descent method is used to optimize the numerical parameters. This hybrid approach is then successfully applied to the problem that concerns the prediction of machining induced residual stresses in aerospace aluminium alloys. Based on the developed reliable prediction models, NSGA-II is further applied to the multiobjective optimal design of aluminium alloys in a “reverse-engineering” fashion. It is revealed that the optimal machining regimes to minimize the residual stress and the machining cost simultaneously can be successfully located.
24 February 2006 in Experimental Mechanics
23 January 2020 in Annals of Biomedical Engineering
The Intraosseous Transcutaneous Amputation Prosthesis (ITAP) offers transfemoral amputees an ambulatory method potentially reducing soft tissue complications seen with socket and stump devices. This study validated a finite element (in silico) model based on an ITAP design and investigated implant stem stiffness influence on periprosthetic femoral bone strain. Results showed good agreement in the validation of the in silico model against the in vitro results using uniaxial strain gauges and Digital Image Correlation (DIC). Using Strain Energy Density (SED) thresholds as the stimulus for adaptive bone remodelling, the validated model illustrated that: (a) bone apposition increased and resorption decreased with increasing implant stem flexibility in early stance; (b) bone apposition decreased (mean change = − 9.8%) and resorption increased (mean change = 20.3%) from distal to proximal in most stem stiffness models in early stance. By engineering the flow of force through the implant/bone (e.g. by changing material properties) these results demonstrate how periprosthetic bone remodelling, thus aseptic loosening, can be managed. This paper finds that future implant designs should be optimised for bone strain under a variety of relevant loading conditions using finite element models to maximise the chances of clinical success.
1 May 2007 in Optical Engineering
The detection of cracks in rails is a challenging problem, and much research effort has been spent in the development of reliable, repeatable crack detection methods for use on in-service rails. While crack detection in the rail head and shear web is reliably achieved using ultrasonic and eddy current methods, neither technique is particularly effective for the detection of cracks in the rail foot. The authors present a new crack detection method for rail, which utilizes the change in infrared emission of the rail surface during the passage of a train wheel. Initial data from this infrared method are presented, from studies of both a laboratory-based three-point bend specimen and a short section of rail. The results of these two studies confirm the ability of the proposed method to locate and quantify surface-connected notches and cracks.
23 December 2020 in Royal Society Open Science
Thermoelastic stress analysis using arrays of small, low-cost detectors has the potential to be used in structural health monitoring. However, evaluation of the collected data is challenging using traditional methods, due to the lower resolution of these sensors, and the complex loading conditions experienced. An alternative method has been developed, using image decomposition to generate feature vectors which characterize the uncalibrated map of the magnitude of the thermoelastic effect. Thermal data have been collected using a state-of-the-art photovoltaic effect detector and lower cost, lower thermal resolution microbolometer detectors, during crack propagation induced by both constant amplitude and frequency loading, and by idealized flight cycles. The Euclidean distance calculated between the feature vectors of the initial and current state can be used to indicate the presence of damage. Cracks of the order of 1 mm in length can be detected and tracked, with an increase in the rate of change of the Euclidean distance indicating the onset of critical crack propagation. The differential feature vector method therefore represents a substantial advance in technology for monitoring the initiation and propagation of cracks in structures, both in structural testing and in-service using low-cost sensors.