The mechanical resistance of trees is essential for their survival during strong wind events, enabling them to function effectively within an ecosystem. In this study, large eddy simulation is employed to investigate the aerodynamic characteristics of isolated trees with various crown geometries, as well as clustered tree canopies arranged in different patterns and spacing, under both normal and oblique wind directions. For each condition, the aerodynamic force coefficients are evaluated and the underlying flow mechanisms are discussed, also providing a comprehensive characterization of aerodynamic interference effects. As expected, results indicate that the effects of crown width and depth on the aerodynamic force coefficients of an isolated tree are very limited, although larger tree canopies generate stronger shielding effects and, thus, larger wakes. The mean and positive peak overturning moment coefficients of clustered tree canopies generally exhibit an increasing trend with the increase in spacing distance due to the enhanced channeling effects. The mean and positive peak overturning moment coefficients of clustered tree canopies are smaller than those of an isolated tree canopy, with interference factors ranging from 0.15 to 0.98. The corresponding interference factors for an oblique wind direction of 45° are smaller than those of 0°.
25 April 2026 in International Journal of Structural Stability and Dynamics
Damage of the cladding structures usually occurs from the wind-sensitive part, which can cause the damaged conditions to obviously vary from different areas especially on a large roof surface. It is necessary to design optimization due to the difference of wind loads by defining more accurate wind pressure coefficient (WPC) zones according to the wind vulnerability analysis. The existing wind pressure coefficient zoning methods (WPCZM) have successfully been used to characterize the simple roof shapes. But the solutions for the complex and irregular roof shapes generally rely on the empirical judgment which is defective to the wind loading analysis. In this study, a classification concept for WPC values on the roof surface is presented based on the unsupervised learning algorithm, which is not limited by the roof geometry and can realize the multitype WPC zoning more accurately. As a typical unsupervised learning algorithm, an improved K-means clustering is proposed to develop a new WPCZM to verify the above concept. And a method to determine the optimal K-value is presented by using the K-means clustering test and clustering validity indices to overcome the difficulty of obtaining the cluster number in the traditional methods. As an example, the most unfavorable pressure and suction WPC zones are studied on a flat roof structure with single wind direction and full wind direction based on the data obtained from the wind tunnel test. As another example, the mean pressure coefficient zones are studied on a saddle roof structure under 0- and 45-degree wind direction based on the data obtained by the wind tunnel test. And the proposed WPCZM is illustrated and verified.