Increasing process variation can significantly degrade the write-ability of an SRAM. In this paper, we propose negative bit- line voltage technique to improve cell write-ability without using any on-chip or off-chip negative voltage source. Capacitive coupling is used to generate a transient negative voltage at the low bit-line during write operation. Simulations in 45 nm PD/SOI technology show a 10 3 times reduction in the write-failure probability with the proposed technique.
1 October 2007 in 2007 IEEE International SOI Conference
A framework for accurately determining the device currents in trapezoidal FinFET devices is presented. The analytical formulation also computes the equivalent threshold voltage of an ideal rectangular fin with iso-current characteristics. The approach easily lends itself to the sensitivity analysis of device currents to variations in the geometric parameters.
Simple ring-oscillator circuit has been used to estimate the degradation in circuit performance due to negative bias temperature instability (NBTI) effect but it fails to isolate the degradation from the NBTI for PMOS and the positive bias temperature instability (PBTI) for NMOS in high-K dielectric/metal gate CMOS technology. In this paper, we propose new circuit structures which monitor the NBTI and the PBTI effects separately while conserving the simplicity and efficiency of a ring oscillator based circuit. We also show that the proposed circuits have better sensitivity to the NBTI effect than conventional ring-oscillator circuit when they are used in technologies that experience negligible PBTI effect.
20 June 2023 in IEEE Solid-State Circuits Magazine
The IBM Telum II microprocessor features eight cores operating at a base frequency of 5.5 GHz, ten 36-MB L2 caches achieving 3.6-ns access latency, a 360-MB virtual L3 cache, and a new on-chip data processing unit (DPU) for I/O acceleration. As the foundation of the IBM z17 system’s dual-chip modules (DCMs), Telum II maintains high reliability and a power profile within 5% of the prior generation, while simultaneously increasing frequency and increasing latch count by 40%. Power, performance, area, and reliability enhancements span the design stack, including high-density SRAM cells from the Samsung 5-nm technology for increased cache size; design–technology co-optimizations (DTCOs) in the standard cell library image and sequential elements; physical design (PD), logic and architectural advancements to the core and artificial intelligence (AI) accelerator; and improved system-level capacity and encryption.