We have fabricated a thin-film optical detector for detecting short optical pulses propagating in channel waveguides. The detectors show response times of 200 ps full width at half maximum amplitude when illuminated by guided, subpicosecond optical pulses. The detectors are formed by depositing hydrogenated amorphous silicon (a-Si:H) directly on the dielectric channel waveguides. Back-to-back Schottky photodiodes are then formed when interdigitated chrome-gold metal contacts are deposited on the a-Si:H.
The detection performance of a walk-through metal detector (WTMD) is affected not only by the electromagnetic properties and size and shape of the test objects, but potentially also by the type of motion of the test object through the portal of the WTMD. This motion, it has been argued, can contribute to the uncertainty in detecting threat objects being carried through the WTMD. Typical laboratory-based testing uses a robotic system, or similar, to push a test object through the portal with a trajectory that is a straight line and has a constant velocity. This testing, although reproducible and accurate, does not test for those trajectories the are representative of natural body motion. We report the effects of nonrectilinear trajectories on the detection performance of WTMDs.
12 September 2018 in Journal of Testing and Evaluation
The detection performance of handheld and hand-worn metal detectors is based on observing an alarm indication from the metal detector when a test object is brought near the metal detector. These test objects maybe actual threat items or simulated threat items. The detectability of the test object is dependent on the electromagnetic properties of the test object, its shape and size, and its orientation relative to the magnetic field generated by the metal detector. Small misorientations of a test object, relative to a reference orientation, may cause the operator to incorrectly attribute a higher performance to the metal detector than it can provide. Consequently, to support accurate and reproducible characterization of the performance of a metal detector, orientation effects should be minimized or eliminated. Spherical test objects are presented to eliminate these effects for handheld and hand-worn metal detector performance assessments.