The research presented in this paper is a performance study of short-range NLOS ultraviolet (UV) communication system, using a Monte-Carlo-based system-level model, in which the channel parameters, such as the path loss and the background noise are experimentally measured using an outdoor UV communication test-bed. Various transceiver geometry and background noise condition are considered. Furthermore, 4 modulation schemes are compared, which provides an insight into the performance prediction and the system trade-offs among the path loss, the optical power, the distance, the link geometry, the bit rate and the bit error rate. Finally, advices are given on UV system design and performance improvement.
A digital pre-distortion waveform shaping scheme combined with a blue filter is proposed to optimize both the rise and fall times of a light-emitting diode (LED) and the optical receiver current of the signal of the real-time visible light communication (VLC) system. The proposed scheme is implemented on a field-programmable gate array (FPGA) and a digital-to-analog converter-based testbed, which is flexible and reconfigurable by programming the FPGA to match different LED characteristics and varied data rates. A 262-Mbps non-return-to-zero on-off keying modulation-based real-time VLC-link with a bit error rate of less than 1.0$\times$10$^{-6}$ is achieved over a transmission distance of 5.0 m, which uses a single white phosphorous LED with a limited power of 0.1-W.
In this paper, a method to improve the performance of Ultraviolet (UV) communication system without hardware enhancement in the optical link is presented and tested. Three kinds of noises are modeled and their impacts on the UV communication system are measured and analyzed. An FPGA-based moving average filter is utilized to reduce noise. In order to validate the designed filter, we implement a BER tester by using two independent FPGA models. The results show that the filter is able to improve the system performance evidently.
We develop an optical camera communication system utilizing the under-sampled digital PAM subcarrier modulation using two LEDs. We show that the proposed system can realize 100bps data transmission over a transmission range up to 50m