30 June 2021 in Green Chemistry
Biodegradation of shed fibres originated from textile washing.
19 July 2023 in Progress in Additive Manufacturing
Flexible, elastomeric materials for 3D printing have attracted considerable interest due to their potential application in clothing, shoe manufacturing and orthopedics. At the same time, smart clothing is also moving closer to more mainstream applications; as such, it is of considerable interest to combine both the structural and smart functions 3D printing offers in one material. While smart functionalities may be incorporated in a textile in a variety of ways (e.g. using shape-memory polymers), the use of electronic components such as sensors and actuators allow smart response to a multitude of stimuli. This necessitates the use of conductive and flexible materials that offer reliable conductivity after printing and provide optically attractive results. It is known that print conditions influence electrical properties, but while the print parameters are well researched for hard materials, there is not as much research for flexible compounds. Here, we show the influence of print speed, temperature, infill orientation, layer thickness and print mode (i.e. time between printing of successive layers). It was found that the most influential parameters are print mode, infill orientation and print temperature. The differences in electrical properties between the three materials used in this test may be explained by differences in filler content. A preliminary study into the optimization of the shape of a printed conductive line on elastic textile shows that the overall length of the printed path needs to be adapted to the maximum stretch of the textile, while shape has little influence on conductivity.
26 April 2024 in Frontiers in Environmental Science
The global increase of the amount of microplastics in aquatic systems is an ever-growing problem. Household laundering of synthetic textiles has been identified as one significant reason for the release of fibrous microplastics (FMP), although a high proportion of the waste water generated by the washing process is filtered by wastewater treatment plants, e.g., in Germany, before it enters the environment. The washing of garments made of synthetic materials is considered particularly and was investigated during this study. Therefore, 11 fleece garments, one mixed batch and three non-raised garments were washed several times and under different conditions in houshold washing machines. However, this study utilizing different functional polyester garments showed that mechanical raised textiles (e.g., fleece) do not generally have higher emission values than non-raised textiles, such as sports shirts and sports pants. During the washing process, the release of FMP can be influenced by different washing parameters, always aiming for a good washing result. The experiments showed, that the release of FMP into the aquatic environment can be reduced by the washing habits—especially a high washing machine load and a shortened washing time were found to be effective.