In this paper, the effects of geometrical discontinuities and topological structure on Rotary Travelling Wave Oscillators (RTWO) are studied. Using the 3D electromagnetic simulator EMPro Simulation Software Design Platform, we have found that reducing the corner discontinuities can increase the oscillation frequency up to 3.34%. Additionally, we observed that the topological structure of the RTWO affects also the different performance parameters, since as more folds and overlaps between metallic levels present the structure, the oscillation frequency is reduced and the power consumption of the RTWO resonator is increased.
In this work, a simple electric circuit model for the evaluation of the impact of vias (inter-metallic vertical connections) in resonant rotary traveling wave oscillator (RTWO) is proposed. A test structure was designed to quantify the degradation on the signal integrity of RTWOs caused by these vias. The test structure and the RTWO were designed according to the rules of the 130 nm commercial mixed mode, Single-Poly 8-Metal (1P8M), P-substrate, RFCMOS technology. The vias test structure consist of vertical inter-metallic connections and respective metallic pads. According to the used technology, the test structure was implemented using copper for all the metals layers. Simulations were performed using advanced tools: a 3D electromagnetic simulator (EMpro) for the extraction of the electrical properties of the test structure, HSPICE for electrical simulation and Mentor Graphics IC Studio for the geometric pattern (layout) design of the test structure. Finally, a 26.87 GHz RTWO was designed to quantify the performance of the oscillator under the effect of the vias.
12 April 2024 in Pädi Boletín Científico de Ciencias Básicas e Ingenierías del ICBI
Obtener un diagnóstico clínico a tiempo se ha convertido en un objetivo primordial para la medicina, ya que las enfermedades avanzan constantemente, por lo cual se necesita de un mayor apoyo de la ingeniería para el desarrollo de sistemas capaces de realizar procedimientos automatizados y eficaces que beneficien este campo. En este trabajo se aborda el caso de las máquinas procesadoras de tejidos, se presenta el diseño y simulación del control eléctrico-electrónico de este equipo biomédico que permite la manipulación y el tratamiento de biopsias, cuyo proceso consta de doce pasos. La biopsia es un procedimiento donde se obtiene tejido de cualquier organismo para su estudio histopatológico. Uno de los procedimientos del sistema de biopsia es la recolección de muestras. El sistema para manipulación y control de la máquina está compuesto por un sistema electrónico, diseñado con una etapa de aislamiento óptico, amplificación, registro de temperatura, control de temperatura y control del cambio de giro de los motorreductores. Para la simulación de cada una de las etapas, se utilizó Proteus Demo y LabVIEW en su versión estudiantil.
31 December 2019 in Revista del Desarrollo Tecnologico
In recent years, the implementation of solar energy facilities has grown, as it is considered an environmentally friendly way to produce electricity. Solar energy can be exploited under different configurations or connection schemes. The most useful connection schemes are the string connection, the power optimizers and the microinverters. Microinverters have a wide advantage compared to the other schemes due to their ability to take advantage of solar energy under different environmental conditions, such as partial shading, temperature and irradiation. The implementation of microinverters has been slowed down because of its high cost and reduced lifetime. In general, the design of microinverters commonly includes elements such as transistors, electrolytic capacitors, sensors and a microcontroller. Electrolytic capacitors are commonly used as decoupling stages, even though they present a lower lifetime due to high frequencies of operation and current rises. In this paper, a new microinverter topology is presented, it uses a low-cost array of multilayer capacitors to filter high frequencies and get a low-cost topology.
1 August 2018 in Advances in Science, Technology and Engineering Systems Journal