We propose and demonstrate a novel dynamically tunable fiber-based Lyot filter for the realization of a dual-wavelength mode-locked fiber laser, operating at center wavelengths of 1535 nm and 1564 nm. The same laser cavity can also be operated in a single-wavelength mode-locked regime with a wavelength tuning range of 30 nm, from 1532 nm to 1562 nm. The proposed dynamically tunable Lyot-filter provides a simple setup for laser mode-locking using a single laser cavity design to generate dual-wavelength pulses, with the flexibility to also allow the generation of single-wavelength pulses with a continuously-tunable center wavelength.
Wavelength tunable mode-locked fiber lasers have highly potential applications in precision spectroscopy, nonlinear microscopy and photonic sensing. Here, we present a compact and thermal-sensitive reflective Lyot filter and utilize it for all-polarization-maintaining efficiently wavelength-tunable Er-doped carbon-nanotube-mode-locked laser for the first time, to the best of our knowledge. The output wavelength of the laser can be tuned from 1544.46 nm to 1572.71 nm, with a wide tuning range of 28.25 nm, and a remarkable tuning efficiency of 0.589 nm/°C, when the angle-spliced fiber is only 8.2 cm and the free spectral range of the filter is 31.32 nm. Dual-wavelength mode-locking is also achieved at boundary temperatures when increasing the pump power. Due to its compact size and reflection configuration, the proposed reflective Lyot filter is promising for realizing highly efficient wavelength tuning and multiwavelength generation in all-polarization-maintaining fiber lasers where reflective filters are needed.
For the first time, to the best of our knowledge, in the soliton regime, we demonstrate an L-band fiber laser mode-locked by all polarization-maintaining (all-PM) nonlinear polarization rotation (NPR). A numerical study suggests that lengthening the NPR section boosts modulation depth and lowers saturation power of the artificial saturable absorber (SA). With the longest NPR section to date (21 m), the laser emits 1.25-ps soliton pulses at 1584.2 nm and a 3.9-MHz repetition rate. Our laser provides a promising L-band seed source, exhibiting improved repeatability and stability compared with non-PM L-band pulse fiber lasers.
A laser mode-locking phenomenon based on polarization-dependent loss (PDL) using a passive fiber coil is demonstrated. We propose using a fiber coil operating in low-V-number regime to achieve an enhanced bend-induced PDL and to maintain a reasonable bend loss. A mode-locked thulium doped all-fiber laser is shown using the low-V-number fiber coil. The results indicate that a moderate amount of PDL at 1 dB is sufficient to initiate and sustain a stable CW mode-locking operation. To the best of our knowledge, this is the first demonstration of a CW mode-locked fiber laser based on PDL enabled by a fiber coil.
26 November 2021 in Journal of Lightwave Technology
We propose and demonstrate an overall non-mechanical spectrally steered laser rangefinder using the dispersion-tuned swept laser (DTSL) and a passive diffractive element. The DTSL has no mechanical moving parts, making it possible to achieve an inertial-free high wavelength sweeping speed. The inherent intensity-modulation characteristic of the DTSL allows the modulation phase-shift method to be applied, similar to that used for an amplitude-modulated continuous-wave (AMCW) rangefinder. Since the pulse repetition rate of the DTSL is chirped, standard signal processing techniques for AMCW are not applicable. In this paper, we propose a novel chirped amplitude-modulated phase-shift (CAMPS) method with a signal processing technique to obtain the phase-shift information from a chirped amplitude-modulated signal. As a proof of concept, we demonstrated the CAMPS LiDAR with an axial ranging resolution of ∼50 μm at a scanning speed of 10 kHz.
We present for the first time, to the best of our knowledge, the pump-power-controlled, all-polarization-maintaining (all-PM), all-fiber configured, wavelength-tunable mode-locked fiber laser in the L-band (1565 to 1625 nm). A tuning range over 20 nm (1568.2 to 1588.9 nm) is attained simply by varying the pump power between 45 and 115 mW. Our work represents the first demonstration of wavelength tuning in all-PM configured nonlinear polarization evolution (NPE) lasers. The non-mechanical and electrically controllable tuning method offers ease of use and cost efficiency within an advanced all-PM, all-fiber design, indicating promising adaptability to diverse wavelength bands.