Spyridon Pavlidis

Spyridon Pavlidis

Auto-generated profile, based on publicly available information

Spyridon Pavlidis

NC State University

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 December 2016 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
GPGeorges Pavlidis
Georges Pavlidis
SPSpyridon Pavlidis
Spyridon Pavlidis
EHEric R. Heller
Eric R. Heller
EMElizabeth A. Moore
Elizabeth A. Moore
RVRamakrishna Vetury
Ramakrishna Vetury
SGSamuel Graham
Samuel Graham
In this paper, gate resistance thermometry (GRT) was used to determine the channel temperature of AlGaN/GaN high electron-mobility transistors. Raman thermometry has been used to verify GRT by comparing the channel temperatures measured by both techniques under various bias conditions. To further validate this technique, a thermal finite-element model has been developed to model the heat dissipation throughout the devices. Comparisons show that the GRT method averages the temperature over the gate width, yielding a slightly lower peak temperature than Raman thermography. Overall, this method provides a fast and simple technique to determine the average temperature under both steady-state and pulsed bias conditions.

25 April 2022 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
DKDolar Khachariya
Dolar Khachariya
SMSeiji Mita
Seiji Mita
PRPramod Reddy
Pramod Reddy
SDSaroj Dangi
Saroj Dangi
JDJ. Houston Dycus
J. Houston Dycus
SPSpyridon Pavlidis
Spyridon Pavlidis
The ultra-wide bandgap of Al-rich AlGaN is expected to support a significantly larger breakdown field compared to GaN, but the reported performance thus far has been limited by the use of foreign substrates. In this Letter, the material and electrical properties of Al0.85Ga0.15N/Al0.6Ga0.4N high electron mobility transistors (HEMT) grown on a 2-in. single crystal AlN substrate are investigated, and it is demonstrated that native AlN substrates unlock the potential for Al-rich AlGaN to sustain large fields in such devices. We further study how Ohmic contacts made directly to a Si-doped channel layer reduce the knee voltage and increase the output current density. High-quality AlGaN growth is confirmed via scanning transmission electron microscopy, which also reveals the absence of metal penetration at the Ohmic contact interface and is in contrast to established GaN HEMT technology. Two-terminal mesa breakdown characteristics with 1.3 μm separation possess a record-high breakdown field strength of ∼11.5 MV/cm for an undoped Al0.6Ga0.4N-channel layer. The breakdown voltages for three-terminal devices measured with gate-drain distances of 4 and 9 μm are 850 and 1500 V, respectively.

15 March 2021 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
MBM. Hayden Breckenridge
M. Hayden Breckenridge
PBPegah Bagheri
Pegah Bagheri
QGQiang Guo
Qiang Guo
Biplab SarkarBiplab Sarkar
Biplab Sarkar
DKDolar Khachariya
Dolar Khachariya
ZSZlatko Sitar
Zlatko Sitar
We demonstrate Si-implanted AlN with high conductivity (>1 Ω−1 cm−1) and high carrier concentration (5 × 1018 cm−3). This was enabled by Si implantation into AlN with a low threading dislocation density (TDD) (<103 cm−2), a non-equilibrium damage recovery and dopant activation annealing process, and in situ suppression of self-compensation during the annealing. Low TDD and active suppression of VAl-nSiAl complexes via defect quasi Fermi level control enabled low compensation, while low-temperature, non-equilibrium annealing maintained the desired shallow donor state with an ionization energy of ∼70 meV. The realized n-type conductivity and carrier concentration are over one order of magnitude higher than that reported thus far and present a major technological breakthrough in doping of AlN.

1 October 2024 in Applied Physics Express
Verified
Journal Article
Open access
CQC. E. Quiñones
C. E. Quiñones
DKD. Khachariya
D. Khachariya
PRP. Reddy
P. Reddy
SMS. Mita
S. Mita
JAJ. Almeter
J. Almeter
ZSZ. Sitar
Z. Sitar
AlN Schottky barrier diodes with low ideality factor (<1.2), low differential ON-resistance (5 kA cm−2), and high breakdown voltage (680 V) are reported. The device structure consisted of a two-layer, quasi-vertical design with a lightly doped AlN drift layer and a highly doped Al0.75Ga0.25N ohmic contact layer grown on AlN substrates. A combination of simulation, current–voltage measurements, and impedance spectroscopy analysis revealed that the AlN/AlGaN interface introduces a parasitic electron barrier due to the conduction band offset between the two materials. This barrier was found to limit the forward current in fabricated diodes. Further, we show that introducing a compositionally-graded layer between the AlN and the AlGaN reduces the interfacial barrier and increases the forward current density of fabricated diodes by a factor of 104.

12 December 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SSShane R. Stein
Shane R. Stein
DKDolar Khachariya
Dolar Khachariya
WMWill Mecouch
Will Mecouch
SMSeiji Mita
Seiji Mita
PRPramod Reddy
Pramod Reddy
SPSpyridon Pavlidis
Spyridon Pavlidis
We report on vertical GaN junction barrier Schottky (JBS) diodes formed by Mg ion implantation and ultrahigh -pressure annealing (UHPA). The static ON-state characteristics of the diodes show an ideality factor of 1.05, a turn-on voltage of $\sim$ 0.7 V, a current rectification ratio of $\sim$ 10 $^{11}$ , and a low differential specific ON-resistance that scales with Schottky stripe width in fair agreement with the analytical model. The reverse leakage dependence on Schottky stripe width also agrees well with the analytical model. Implanted p-n junction diodes fabricated on the same wafer exhibit avalanche breakdown in reverse bias with a positive temperature coefficient, but the forward current is limited by a series barrier. Temperature-dependent current–voltage measurements of th p-n diodes verify the presence of the implanted p-n junction and reveal an additional 0.43-eV barrier, which we hypothesize arises from a p-Schottky contact and forms a second diode back-to-back with the p-n junction. This interpretation is supported by analysis of the capacitance–voltage characteristics of the implanted p-n diodes, epitaxial p-n diodes fabricated with intentional p-Schottky contacts, and comparison to TCAD simulations. Ultimately, the presence of the p-Schottky contact does not hinder JBS diode operation. The use of diffusion-aware designs and/or diffusion reduction represents future directions for Mg implantation technology in GaN power devices.

23 October 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
CQC. E. Quiñones
C. E. Quiñones
DKD. Khachariya
D. Khachariya
PBP. Bagheri
P. Bagheri
PRP. Reddy
P. Reddy
SMS. Mita
S. Mita
ZSZlatko Sitar
Zlatko Sitar
Near-ideal behavior in Schottky contacts to Si-doped AlN was observed as evidenced by a low ideality factor of 1.5 at room temperature. A temperature-independent Schottky barrier height of 1.9 eV was extracted from temperature-dependent I–V measurements. An activation energy of ∼300 meV was observed in the series resistance, which corresponded to the ionization energy of the deep Si donor state. Both Ohmic and Schottky contacts were stable up to 650 °C, with around four orders of magnitude rectification at this elevated temperature. These results demonstrate the potential of AlN as a platform for power devices capable of operating in extreme environments.